Re: No SANE Devices Found

From: Thomas Gebhardt (gebhardt@hrz.uni-marburg.de)
Date: Mon Apr 30 2001 - 01:57:07 PDT

  • Next message: Simon Krix: "(no subject)"

    Hi,

    > On Fri, Apr 27, 2001 at 10:50:47AM +0200, Thomas Gebhardt wrote:
    > > /proc/bus/usb/devices says vendor id=05d8 (Artec/Ultima?),
    > > prod id=4002. So I installed the scanner module with this
    > > options (vendor=0x05d8 product=0x4002).
    >
    > If it was Mustek 1200 UB compatible, the vendor would be 0x055f and
    > product 0x0006. Maybe it works with the 1200ub backend nevertheless.

    You are right, the LT 9452 is not Mustek 1200 UB compatible. I was
    set on the wrong track by the technical support team. The vendor id
    0x05d8 points to artec/ultima.

    I figured out (when I had a look at the sources) that the generic
    2.4.3 Linux USB Sanner driver cannot handle the LT 9452 because
    only scanners with "two or three USB endpoints" are supported.
    The LT 9452 has just one "USB endpoint".

    My background knowledge about USB is too limited to get an idea
    about what that means. So I returned the scanner back.

    Thanks, Thomas

    Thanks a lot, Thomas 

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Mon Apr 30 2001 - 01:51:54 PDT