I'm a bit puzzled by the behavior of the microtek V6 USL when trying it
under xscanimage.
The light inside the scanner is on just before scanning, but when the
actual scan or preview starts, the light goes out, giving me always dark
scans.
- microtek V6 USL running on scsi.
- built SANE 1.0.3 for Mandrake7.1/i686
- xscanimage is using the backend microtek2 drivers
Any suggestions?
Thanks!
Jason
jaten@ucla.edu
p.s. here's the output of xscanimage on startup
Scanner attributes from device structure
========================================
Scanner ID...
~~~~~~~~~~~~
Vendor Name : ' '
Model Name : 'Scanner V6USL '
Revision : '1.60'
Model Code : 0xa3 (ScanMaker V6USL)
Device Type Code : 0x06 (Scanner),
Scanner type : Flatbed scanner
Supported options : Automatic document feeder: Yes
Transparency media adapter: Yes
Auto paper detecting: No
Advanced picture system: No
Stripes: No
Slides: No
Scan button : Yes
Imaging Capabilities...
~~~~~~~~~~~~~~~~~~~~~~
Color scanner : Yes
Number passes : 1 pass
Resolution : X-max: 600 dpi
Y-max: 1200 dpi
Geometry : Geometric width: 5100 pts (8.50'')
Geometric height: 8400 pts (14.00'')
Optical resolution : 600
Modes : Lineart: Yes
Halftone: No
Gray: Yes
Color: Yes
Depths : Nibble Gray: Yes
10-bit-color: No
12-bit-color: Yes
d/l of HT pattern : No
Builtin HT pattern : 0
LUT capabilities: : None
Miscellaneous capabilities...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data format : Line by line in concatenated sequence,
without color indicator
Color Sequence : B - G - R
Scanning direction : Left to right
CCD gap : 4 lines
CCD pixels : 5100
Calib white stripe location : -354
Max calib space : 118
Number of lens : 1
Max number of windows : 1
Shading transfer function : 0
Red balance : 240
Green balance : 248
Blue balance : 251
Buffer type : Ring
FEPROM : No
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Sun Dec 10 2000 - 02:15:54 PST