Problems with HP 6350 when ADF and XPA connected simultaneously

From: Jeffrey H. Ingber (jhingber@ix.netcom.com)
Date: Tue Nov 07 2000 - 08:30:40 PST

  • Next message: phil_endecott@spamcop.net: "Epson 640U - similar to 610?"

    Hello.

    I have an HP 6350 outfitted with an ADF and a transparency adapter. I
    am having difficulty when both devices are connected simultaneously to
    the scanner. When *just* the scanner and ADF are connected scanning
    functions as expected. When I add the XPA to the mix, I can *only* scan
    with the XPA and am unable to perform a normal scan or scan with the
    ADF. Xscanimage will allow selection of any device, but the scan is
    always performed with the XPA regardless of which device is selected.

    SuSE Linux 6.4 with kernel 2.4.0-test10-SMP on an i616
    Adaptec 19160 U160 SCSI

    Here is my kernel log output which is probably of little value.

    <6>(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI
    0/17/0
    <6>(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
    <6>(scsi0) Downloading sequencer code... 392 instructions downloaded
    <6>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
    <4> <Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
    <6>(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
    <4> Vendor: IBM Model: DNES-309170W Rev: SA30
    <4> Type: Direct-Access ANSI SCSI revision: 03
    <6>(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 31.
    <4> Vendor: IBM Model: DNES-309170W Rev: SA30
    <4> Type: Direct-Access ANSI SCSI revision: 03
    <6>(scsi0:0:2:0) Synchronous at 80.0 Mbyte/sec, offset 31.
    <4> Vendor: IBM Model: DNES-309170W Rev: SA30
    <4> Type: Direct-Access ANSI SCSI revision: 03
    <4> Vendor: HP Model: T20 Rev: 3.01
    <4> Type: Sequential-Access ANSI SCSI revision: 02
    <6>(scsi0:0:3:0) Synchronous at 20.0 Mbyte/sec, offset 15.
    <4> Vendor: YAMAHA Model: CRW8424S Rev: 1.0j
    <4> Type: CD-ROM ANSI SCSI revision: 02
    <4> Vendor: IOMEGA Model: ZIP 100 Rev: D.13
    <4> Type: Direct-Access ANSI SCSI revision: 02
    <4> Vendor: HP Model: C7670A Rev: 3925
    <4> Type: Processor ANSI SCSI revision: 02
    <4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
    <4>Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
    <4>Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
    <4>Detected scsi removable disk sdd at scsi0, channel 0, id 5, lun 0
    <4>SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) 

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Tue Nov 07 2000 - 08:26:53 PST