Hi Jeffrey,
how does it work to have the ADF AND the transparency adapter on the
scanner ? You dont need to change the hardware between the two modes ?
Please do a test for the ADF scan. Start xscanimage and change to normal
scan source. Then place paper in the ADF. Then change scan source to ADF
and start a scan. If this activates the transparency adapter I would
like to have a debug listing of the hp-backend for that action. Generate
it with
export SANE_DEBUG_HP=13
xscanimage hp > hp.lis 2>&1
gzip the hp.lis and send it to me.
--Peter
"Jeffrey H. Ingber" wrote:
>
> Hello.
>
> I have an HP 6350 outfitted with an ADF and a transparency adapter. I
> am having difficulty when both devices are connected simultaneously to
> the scanner. When *just* the scanner and ADF are connected scanning
> functions as expected. When I add the XPA to the mix, I can *only* scan
> with the XPA and am unable to perform a normal scan or scan with the
> ADF. Xscanimage will allow selection of any device, but the scan is
> always performed with the XPA regardless of which device is selected.
>
> SuSE Linux 6.4 with kernel 2.4.0-test10-SMP on an i616
> Adaptec 19160 U160 SCSI
>
> Here is my kernel log output which is probably of little value.
>
> <6>(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI
> 0/17/0
> <6>(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
> <6>(scsi0) Downloading sequencer code... 392 instructions downloaded
> <6>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
> <4> <Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
> <6>(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
> <4> Vendor: IBM Model: DNES-309170W Rev: SA30
> <4> Type: Direct-Access ANSI SCSI revision: 03
> <6>(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 31.
> <4> Vendor: IBM Model: DNES-309170W Rev: SA30
> <4> Type: Direct-Access ANSI SCSI revision: 03
> <6>(scsi0:0:2:0) Synchronous at 80.0 Mbyte/sec, offset 31.
> <4> Vendor: IBM Model: DNES-309170W Rev: SA30
> <4> Type: Direct-Access ANSI SCSI revision: 03
> <4> Vendor: HP Model: T20 Rev: 3.01
> <4> Type: Sequential-Access ANSI SCSI revision: 02
> <6>(scsi0:0:3:0) Synchronous at 20.0 Mbyte/sec, offset 15.
> <4> Vendor: YAMAHA Model: CRW8424S Rev: 1.0j
> <4> Type: CD-ROM ANSI SCSI revision: 02
> <4> Vendor: IOMEGA Model: ZIP 100 Rev: D.13
> <4> Type: Direct-Access ANSI SCSI revision: 02
> <4> Vendor: HP Model: C7670A Rev: 3925
> <4> Type: Processor ANSI SCSI revision: 02
> <4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
> <4>Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
> <4>Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
> <4>Detected scsi removable disk sdd at scsi0, channel 0, id 5, lun 0
> <4>SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
>
> --
> Source code, list archive, and docs: http://www.mostang.com/sane/
> To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
-- Peter Kirchgessner http://www.kirchgessner.net mailto:peter@kirchgessner.net-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Tue Nov 07 2000 - 10:33:01 PST