Re: Resetting HP scanners

• Previous message: Jonathan Johnson: "Resetting HP scanners"
• In reply to: Jonathan Johnson: "Resetting HP scanners"
• Next in thread: Bob van der Poel: "man page sane-scsi"
• Next in thread: Christophe Thommeret: "Re: Resetting HP scanners"
• Reply: Bob van der Poel: "man page sane-scsi"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Jonathan Johnson wrote:

>
>
> 1) Disconnect scanner from the SCSI chain and all other SCSI devices.
> 2) With the power switch ON, unplug the scanner for 10 seconds.
> 3) Plug the scanner in for 10 seconds.
> 4) Repeat steps 2 and 3 twice (total of 3 cycles)
> 5) Reconnect the scanner to the system. It should now work.
>
>

Hi Jonathan,

you know that scsi is not designed for hot plugging?!

You may destroy the scanner or other scsi devices when
connecting a scsi device while any scsi device is turned on.

Bye
Oliver

--
Homepage:       http://www.wolfsburg.de/~rauch
sane-umax:      http://www.wolfsburg.de/~rauch/sane/sane-umax.html
xsane:          http://www.wolfsburg.de/~rauch/sane/sane-xsane.html
E-Mail:         mailto:Oliver.Rauch@Wolfsburg.DE
--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

• Next message: Christophe Thommeret: "Re: Resetting HP scanners"
• Previous message: Jonathan Johnson: "Resetting HP scanners"
• In reply to: Jonathan Johnson: "Resetting HP scanners"
• Next in thread: Bob van der Poel: "man page sane-scsi"
• Next in thread: Christophe Thommeret: "Re: Resetting HP scanners"
• Reply: Bob van der Poel: "man page sane-scsi"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Jul 26 2000 - 13:59:12 PDT