Luca Del Signore wrote:
>
> "Dr. Andreas Bolsch" wrote:
> >
> > Would be useful to describe your problem precisely instead of
> > sending useless blabla.
> >
> Well if you take a look of my entire mail its FULLY explained!
> Anyway, i think it would be useful to repeat myself:
> I have an artec scanner at3 with an ava 1505. My linux partition is a
> 5.3 mandrake with kde 1.1 and kernel 2.2.5 recompiled with the
> appropriate low-level driver.
> It all works fine and it does recognize my scsi adapter perfectly (i
> include my dmesg again)
> But when i try to run scanimage or xscanimage, my artec begins
> calibrating but then , instead of beginning the scan, everything freezes
> and i have to reboot.
> I would like to point out that i have tried everything i can
> (considering i am using linux from
> just three months and had no experience before except the f..ing
> win98...), including creating a link /dev/sga /dev/scanner . I am
> currently using SANE 1.01 (unsuccessfully) after having tried (equally
> unsuccessfully) SANE 1.00-3 the result is always the same: my pc freezes
> after the scanner calibration stage.
> I was about to give up whe i saw that, on the SANE web site, that two
> authors use successfully the same scanner (artec at3) with linux.
> I have tried to send a mail to them AND I DIDNT GET ANY HELP (sorry to
> repeat myself again).
> That's all. I hope you can help and would like to ask you to forgive me
> for my terrible english
>
OPS i forgot the dmesg : here it is
> Luca Del Signore
> Viale Manlio gelsomini, 26
> Rome Italy 00153
> work phone: +393393541194
> lucadels@tin.it
> > --
> > Source code, list archive, and docs: http://www.mostang.com/sane/
> > To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
--------------39FAD069CD5C6257F2F156DD
Content-Type: text/plain; charset=us-ascii;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
Linux version 2.2.2 (root@localhost.localdomain) (gcc version 2.7.2.3) #2 SMP mar apr 20 08:54:58 CEST 1999
mapped APIC to ffffe000 (00255000)
mapped IOAPIC to ffffd000 (00256000)
Detected 200457555 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 399.77 BogoMIPS
Memory: 128004k/131072k available (1036k kernel code, 416k reserved, 1568k data, 48k init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
per-CPU timeslice cutoff: 1.56 usecs.
CPU0: Intel Pentium MMX stepping 03
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xf04b0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport0: no IEEE-1284 device present.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL EL5.1A, ATA DISK drive
hdc: CDA106801ISE, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL EL5.1A, 4892MB w/418kB Cache, CHS=623/255/63, (U)DMA
hdc: ATAPI 10X CD-ROM drive, 120kB Cache
Uniform CDROM driver Revision: 2.52
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x340, IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi : 1 host.
Vendor: ULTIMA Model: AT3 Rev: 1.90
Type: Scanner ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 5, lun 0
scsi : detected total.
PPP: version 2.3.3 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 48k freed
Adding Swap: 40124k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.13 detected OK (220)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
tty_io.c: process 271 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0
registered device ppp0
--------------39FAD069CD5C6257F2F156DD--
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com