Re: Q: Problems with Mustek MFS1200SP

Joachim Kunze (joachim.kunze@metronet.de)
Thu, 25 Feb 1999 18:28:04 +0100

You wrote:
>Hi!
>
>I have several problems with my MFS1200SP (V1.00). I run it under kernel
>2.0.36 with sane 1.00 with a ncr 810 scsi-controller compilant.
>
>Lineart seems to run perfectly. But in greyscaled mode, the scanner
>droppes lines exactly at the positions, where the scanner interrupts a
>short period of time while scanning.
>
>In Color-Mode the same phenomenon as in greyscaled mode occurs.
>Additionaly, when the scanned area is to width (depending on the
>resolution, e.g. for 600dpi the critical width is about 4cm), the scanned
>result have many mismatched pixels.
>
>I havent found an similar problem in the mailing list.
>
>Whats the problem in my configuration?
>
>CU Immo!
>
>
>
>
>
>
>
>--
>Source code, list archive, and docs: http://www.mostang.com/sane/
>To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

Hi Immo,

I use a 12000 SP, but I had the same problems. I solved the problem by changing
the settings of the SCSI-host adapter. Use the following settings (or settings
that sound like the following):

- disconnect: no
- init_sync: no

I hope this helps.

ciao,

Joachim

--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com