I have several problems with my MFS1200SP (V1.00). I run it under kernel
2.0.36 with sane 1.00 with a ncr 810 scsi-controller compilant.
Lineart seems to run perfectly. But in greyscaled mode, the scanner
droppes lines exactly at the positions, where the scanner interrupts a
short period of time while scanning.
In Color-Mode the same phenomenon as in greyscaled mode occurs.
Additionaly, when the scanned area is to width (depending on the
resolution, e.g. for 600dpi the critical width is about 4cm), the scanned
result have many mismatched pixels.
I havent found an similar problem in the mailing list.
Whats the problem in my configuration?
CU Immo!
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com