Visioneer Onetouch 8700 USB
Visioneer 8900
Visioneer Onetouch 8920 USB
USB
0x0461
0x0371
Realtek RTS8801C chipset
The 8900 is detected as <This USB chip looks like a rts8858c? (result from sane-backends 1.0.18)>
See also: http://viceo.orcon.net.nz/
Looks similar to 4800, 5300, and Microtek Scanport 3000.
Identical output in comparison to 5800.
8700:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0461 ProdID=0371 Rev= 1.00
S: Manufacturer=Primax
S: Product=USB Scanner
S: SerialNumber=RTS8801B-0001
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
8900:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0461 ProdID=0371 Rev= 1.00
S: Manufacturer=Primax
S: Product=USB Scanner
S: SerialNumber=RTS8801B-0001
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
8920:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0461 ProdID=0371 Rev= 1.00
S: Manufacturer=Primax
S: Product=USB Scanner
S: SerialNumber=RTS8801C2-004
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
<device descriptor of 0x0461/0x0371 at 001:003>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0461
idProduct 0x0371
bcdDevice 1.00
iManufacturer 1 ((null))
iProduct 2 ((null))
iSerialNumber 8 ((null))
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 6 ((null))
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 0
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 7 ((null))
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 8
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 250 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass =
0)
checking for MA-1017 ...
this is not a MA-1017 (bcdUSB = 0x110)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass =
0)
<Couldn't determine the type of the USB chip>
found USB scanner (vendor=0x0461, product=0x0371) at libusb:001:003
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.