Visioneer Onetouch 8100
USB
0x04a7
0x0321
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04a7 ProdID=0321 Rev= 0.01
S: Manufacturer=Visioneer
S: Product=OneTouch 8100 EPP/USB
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=10(unk. ) Sub=01 Prot=00 Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
<device descriptor of 0x04a7/0x0321 at 001:002 (Visioneer OneTouch 8100 EPP/USB)>
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04A7
idProduct 0x0321
bcdDevice 0.01
iManufacturer 4 (Visioneer)
iProduct 6 (OneTouch 8100 EPP/USB)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 64 (Self-powered)
MaxPower 48 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 16
bInterfaceSubClass 1
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 16)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 16)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 16)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 16)
checking for GL646 ...
this is not a GL646 (bcdUSB = 0x100)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 16)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 16)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 16)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 16)
<Couldn't determine the type of the USB chip>
found USB scanner (vendor=0x04a7 [Visioneer], product=0x0321 [OneTouch 8100 EPP/USB]) at libusb:001:002
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.