Plustek OpticPro S24
Plustek OpticPro ST24
UMAX AstraScan 2850
USB
0x07b3
0x0601
It's a Genesys GL646.
This scanner may be supported by the Genesys backend, when it's finished.
(ST24):
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=07b3 ProdID=0601 Rev= 0.00
S: Manufacturer=PLUSTEK INC
S: Product=USB SCANNER
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms
(ST24):
found USB scanner (vendor=0x07b3 [PLUSTEK INC], product=0x0601 [USB SCANNER],
chip=GL646) at libusb:001:003
(UMAX Astrascan 2850):
found USB scanner (vendor=0x07b3, product=0x0601, chip=GL646) at libusb:001:005
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.