Hewlett Packard Scanjet 3690
USB
0x03f0
0x1405
GL646_HP
26-00204-00A
0314FGKC9-10
EliteMT 100Mhz
Maybe the scanner can be added to the Genesys backend?
Same scanner as 3670c?
Provides slides/film scanning capabilities in the cover.
<device descriptor of 0x03f0/0x1405 at 003:009 (Hewlett-Packard HP Scanjet Scanner)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x03F0
idProduct 0x1405
bcdDevice 1.00
iManufacturer 1 (Hewlett-Packard)
iProduct 2 (HP Scanjet Scanner)
iSerialNumber 12 (CN373S2558)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 48 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bNumEndpoints = 3)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x110)
checking for MA-1509 ...
this is not a MA-1509 (bEndpointAddress = 0x2, bmAttributes = 0x2, wMaxPacketSize = 0x40)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceSubClass = 0xff)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
<This USB chip looks like a GL646_HP>
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1405 [HP Scanjet Scanner], chip=GL646_HP) at libusb:003:009
T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1405 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Scanjet Scanner
S: SerialNumber=CN36CS24D4
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.