Scanners not supported by SANE

Manufacturer and model

Genius ColorPage HR6X Slim

Bus type

USB

Vendor ID

0x0458

Product ID

0x2019

Chipset

Is reported to use the GL646 chipset

I can see the GL646USB chip, a 8pin dil one (34063) (a step-up or step-down voltage regulator I think) and another which is a RAM for sure.

Comments

May be supported by the Genesys backend, when it's finished.

Output of /proc/bus/usb/devices or sane-find-scanner -v -v

<device descriptor of 0x0458/0x2019 at 003:002>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x0458
idProduct             0x2019
bcdDevice             0.00
iManufacturer         10 ((null))
iProduct              11 ((null))
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         224 (Self-poweredRemote Wakeup)
 MaxPower             48 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    16
   bInterfaceSubClass 1
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         8 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 16)
    checking for GT-8911 ...
    this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 16)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 16)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 16)
    checking for GL646 ...
<This USB chip looks like a GL646>

found USB scanner (vendor=0x0458, product=0x2019, chip=GL646) at libusb:003:002
    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.

SANE homepage
Contact