Canon D1230U
USB
0x04A9
0x2209
<device descriptor of 0x04a9/0x2209 at 003:005-04a9-2209-00-00 (Canon Scanner)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04A9
idProduct 0x2209
bcdDevice 0.01
iManufacturer 1 (Canon)
iProduct 2 (Scanner)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 48 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 16
bInterfaceSubClass 1
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 10 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 16)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 16)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 16)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 16)
checking for GL646 ...
this is not a GL646 (bEndpointAddress = 0x83, bmAttributes = 0x3, wMaxPacketSize = 0x1, bInterval = 0xa)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 16)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 16)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 16)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 16)
checking for PV8630/LM9830 ...
this is not a PV8630/LM9830 (bcdUSB = 0x110)
checking for M011 ...
this is not a M011 (bDeviceClass = 0)
checking for RTS8822L-01H ...
this is not a RTS8822L-01H (bEndpointAddress = 0x81, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for rts8858c ...
this is not a rts8858c (bEndpointAddress = 0x2, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for SQ113 ...
this is not a SQ113 (bcdUSB = 0x110)
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.18-cvs)>
found USB scanner (vendor=0x04a9 [Canon], product=0x2209 [Scanner]) at libusb:003:005-04a9-2209-00-00
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.