Artec 1236 USB
USB
0x05d8
0x4001
The main board loks like this:
+--------------------------------------------+
|.[....]......................+---------+....|
|.............................|....1....|....|
|..+-----+....................+---------+....|
|..|..2..|...................................|
|..+-----+...................................|
|............................................|
+---|......................+---------+.......|
USB.|......................|.........|.......|
+---|......................|....3....|.......|
|..........................|.........|.......|
|........+-----+...........|.........|.......|
|........|..4..|...........+---------+.......|
|........|.....|...........U10...............|
|........+-----+.............................|
|...........+--+................+--+.........|
|...........|.6|................|.8|.........|
|...........+--+................+--+.........|
|...................+------+.................|
|...................|...5..|.................|
|...................+------+.................|
|.....+--+...................................|
|.....|.7|......................+-+.........[|===
|.....+--+......................|9|.........[|===ribbon.to.scanhead
|713-3901-100...................+-+.........[|===
|VER.1.04.[...]..............................|
|022599.9921.................................|
+--------------------------------------------+
Chip#1: GLT710008-15J3
9741 00655
Chip#2: A39665LB
9910
M9101314APA
Chip#3: AT014
620-0014-700
9914WD010
Chip#4: POWERVISION
PV108630-C2L
9919-U2B0A
TAIWAN
Chip#5: Winbond
W6662CF
283664002
9060C
Chip#6: HT93LC46
9851K0264-3
Chip#7: AIC
1563CN
0364E13
Chip#8: 9915U
ULN20003A
Chip#9:
TL 74HC14D
HA C3130ME
HN HRN9914E
D
Same id as one of the Artec Ultima 2000 scanners
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05d8 ProdID=4001 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=1ms
<device descriptor of 0x05d8/0x4001 at 002:004>
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05D8
idProduct 0x4001
bcdDevice 1.00
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 64 (Self-powered)
MaxPower 500 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 0
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 (out 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 1 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
checking for MA-1017 ...
this is not a MA-1017 (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
checking for PV8630/LM9830 ...
<This USB chip looks like a PV8630/LM9830>
found USB scanner (vendor=0x05d8, product=0x4001, chip=PV8630/LM9830) at libusb:002:004
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.