Steven,
please read the information on the following pages:
http://www.freecolormanagement.com/sane/suse71.html
http://www.freecolormanagement.com/sane
To find out what exactly goes wrong, please turn on debugging for
the EPSON backend:
export SANE_DEBUG_EPSON=128
xsane > /tmp/scan.log 2>&1
Please email the log file to my email address _AND NOT TO THE LIST_ -
my address is khk@khk.net
Karl Heinz
Steven Hatfield <ashari@knightswood.net> said:
> Hi all,
> I have an Epson Perfection 1240U, and am trying to get it going under SuSE
> 7.1. I have a vanilla 2.4.3 kernel installed and compiled with USB / UHCI /
> SCANNER all as modules. This is my first attempt at using a USB device, and
> unfortunately I'm not having any luck with it :(
>
> I have /etc/sane.d/epson.conf containing just:
> usb /dev/usb/scanner0
>
> I insert the scanner module with the line:
> insmod scanner product=0x10b vendor=0x4b8
>
> and when I type lsmod, I get:
> usbcore 46832 1 [scanner usb-uhci]
> usb-uhci 21776 0 (unused)
> scanner 6256 0
>
> I have the following installed:
> sane-1.0.4-3
> xsane-0.70-0
>
> When I type "xsane" at the shell prompt, I get the message:
> xsane: no devices available
> and in the console, it shows:
> [epson] ident failed
>
> In /var/log/messages, I see:
> Apr 20 12:29:01 lancelot modprobe: modprobe: Can't locate module char-major-
81
> Apr 20 12:29:01 lancelot last message repeated 4 times
> Apr 20 12:29:01 lancelot kernel: usb-uhci.c: interrupt, status 3, frame# 135
> Apr 20 12:29:01 lancelot kernel: scanner.c: write_scanner: NAK recieved.
> Apr 20 12:29:01 lancelot kernel: usb-uhci.c: interrupt, status 3, frame# 143
> Apr 20 12:29:01 lancelot kernel: scanner.c: write_scanner: NAK recieved.
>
> So I tried a different tactic:
>
> I used "xsane -s epson:/dev/usbscanner" as the shell prompt command, and
> received the message box:
> Failed to open device "epson:/dev/usbscanner":
> Invalid Argument
>
> and in the console, I see:
> [epson] ident failed
>
> /var/log/messages shows:
> Apr 20 12:31:59 lancelot modprobe: modprobe: Can't locate module char-major-
81
> Apr 20 12:31:59 lancelot last message repeated 4 times
> Apr 20 12:31:59 lancelot kernel: usb-uhci.c: interrupt, status 3, frame#
1963
> Apr 20 12:31:59 lancelot kernel: scanner.c: write_scanner: NAK recieved.
> Apr 20 12:31:59 lancelot kernel: usb-uhci.c: interrupt, status 3, frame#
1970
> Apr 20 12:31:59 lancelot kernel: scanner.c: write_scanner: NAK recieved.
> Apr 20 12:32:01 lancelot kernel: scanner.c: open_scanner(0): Scanner device
> is already open
>
> lsmod still shows the same as before at this point (unused/0 for both uhci
> and scanner modules).
>
> What am I doing wrong, and what can I do to get the scanner to work?
>
> Thanks for any help!
> -Steven
>
> --
> Source code, list archive, and docs: http://www.mostang.com/sane/
> To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
>
---- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Fri Apr 20 2001 - 09:48:57 PDT