no SANE device found

From: Vito A. Smaldino (vasmaldo@netbox.com)
Date: Sun Mar 25 2001 - 04:46:36 PST

  • Next message: Steve Broccardo: "Re: Colour matching"

    Hi all,

    i just installed sane (sane-1.0.1-4.i386.rpm , xsane-0.47-2.i386.rpm) on
    my RH 6.2 box and I need help to put it at work. Scanimage does not
    found any SANE devices (no SANE devices found).
    The scanner works fine on the same machine using windows 95.
    Tnx 1k for the support.

    The following are some information about my configuration

    RH 6.2 with kernel 2.2.18
    Mustek 12000 SP +
    SCSI Tekram DC390

    $ scanimage -L
    $ (nothing reported!)

    $ cat /proc/scsi/scsi
    Attached devices:
    Host: scsi0 Channel: 00 Id: 02 Lun: 00
      Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06
      Type: CD-ROM ANSI SCSI revision: 02
    Host: scsi0 Channel: 00 Id: 06 Lun: 00
      Vendor: SCANNER Model: Rev: V101
      Type: Scanner ANSI SCSI revision: 01 CCS

    $ cat /etc/conf.modules
    ....
    pre-install sg modprobe tmscsim
    alias char-major-21 sg

    $ cat /var/log/messages
    ...
    Mar 25 14:06:51 orione kernel: DC390: 1 adapters found
    Mar 25 14:06:51 orione kernel: scsi0 : Tekram DC390/AM53C974 V2.0d
    1998/12/25
    Mar 25 14:06:51 orione kernel: scsi : 1 host.
    Mar 25 14:06:51 orione kernel: DC390: Target 2: Sync transfer 10.0 MHz,
    Offset 15
    Mar 25 14:06:51 orione kernel: Vendor: PIONEER Model: CD-ROM
    DR-U12X Rev: 1.06
    Mar 25 14:06:51 orione kernel: Type:
    CD-ROM ANSI SCSI revision: 02
    Mar 25 14:06:52 orione kernel: DC390: DMA Blast aborted unfinished!
    Mar 25 14:06:52 orione kernel: Vendor: SCANNER
    Model: Rev: V101
    Mar 25 14:06:52 orione kernel: Type:
    Scanner ANSI SCSI revision: 01 CCS
    Mar 25 14:06:52 orione kernel: Detected scsi generic sg1 at scsi0,
    channel 0, id 6, lun 0
    ....

    $ ll /dev/scanner
    lrwxrwxrwx 1 root root 8 Mar 25 11:27 /dev/scanner ->
    /dev/sg1

    $ ll /dev/sg1
    lrwxrwxrwx 1 root users 3 Aug 4 2000 /dev/sg1 -> sgb

    $ ll /dev/sgb
    crw-rw---- 1 root users 21, 1 May 5 1998 /dev/sgb

    $ cat /etc/sane.d/dll.conf
    mustek

    $ cat /etc/sane.d/mustek.conf
    option strip-height 1
    scsi MUSTEK * Scanner
      option linedistance-fix
      option lineart-fix # lineart may be faster with this option off.
    scsi SCANNER
      option linedistance-fix
      option lineart-fix # lineart may be faster with this option off.
    /dev/scanner
      option linedistance-fix
      option lineart-fix # lineart may be faster with this option off.

    --
    Vito A. Smaldino
    

    -- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com



    This archive was generated by hypermail 2b29 : Sun Mar 25 2001 - 09:17:40 PST