Hello,
I have just installed the latest snapscan version 20010319 with sane-1.04. My
scanner is an AGFA Snapscan 1212U_2.
Scanimage works fine, as with the older snapscan version, and scanning is
also great with StarOffice 5.2.
But xscanimage just gives me:
Segmantation fault (see debug log below).
With the older snapscan version, xscanimage had problems in color mode (as
many on the list have been reporting), but it worked.
Did I miss something when installing the new version?
Any help would be appreciated!
Klaus-Peter Schrage
kpschrage@gmx.de
[sanei_debug] Setting debug level of snapscan to 255.
[snapscan] sane_snapscan_init
[snapscan] add_device(/dev/usbscanner)
[snapscan] add_device: Detected (kind of) an USB device
[snapscan] usb_open(/dev/usbscanner)
[snapscan] mini_inquiry
[snapscan] snapscan_cmd
[snapscan] sanei_usb_cmd(10,0x7fffd9a4,6,0x7fffd980,0x7fffd97c (36))
[snapscan] atomic_usb_cmd(10,0x7fffd9a4,6,0x7fffd980,0x7fffd97c (36))
[snapscan] usb_cmd(10,0x7fffd9a4,6,0x7fffd980,0x7fffd97c (36))
[snapscan] usb_cmd: cmdlen=6, datalen=0
[snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00
[snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x41
0x47 ...
[snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] add_device: Is vendor "AGFA" model "SNAPSCAN 1212U_2" a supported
scanner?
[snapscan] usb_close(10)
[snapscan] sane_snapscan_get_devices (0x7fffeac4, 0)
[snapscan] sane_snapscan_open (/dev/usbscanner, 0x7ffff9cc)
[snapscan] find_device
[snapscan] sane_snapscan_open: allocated scanner structure at 0x80a1a30
[snapscan] open_scanner
[snapscan] usb_open(/dev/usbscanner)
[snapscan] sane_snapscan_open: waiting for scanner to warm up.
[snapscan] wait_scanner_ready
[snapscan] test_unit_ready
[snapscan] snapscan_cmd
[snapscan] sanei_usb_cmd(33,0x7ffff80c,6,0x0,0x0 (0))
[snapscan] atomic_usb_cmd(33,0x7ffff80c,6,0x0,0x0 (0))
[snapscan] usb_cmd(33,0x7ffff80c,6,0x0,0x0 (0))
[snapscan] usb_cmd: cmdlen=6, datalen=0
[snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] request_sense
[snapscan] snapscan_cmd
[snapscan] sanei_usb_cmd(33,0x7ffff80c,6,0x7ffff7f8,0x7ffff7f4 (20))
[snapscan] atomic_usb_cmd(33,0x7ffff80c,6,0x7ffff7f8,0x7ffff7f4 (20))
[snapscan] usb_cmd(33,0x7ffff80c,6,0x7ffff7f8,0x7ffff7f4 (20))
[snapscan] usb_cmd: cmdlen=6, datalen=0
[snapscan] usb_write: writing: 0x03 0x00 0x00 0x00 0x14 0x00
[snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] usb_read: reading: 0xf0 0x00 0x00 0x00 0x00 0x00 0x00 0x0b 0x00
0x00 ...
[snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] sense_handler(33, 0x7ffff7f8, 0x80a1a30)
[snapscan] sane_snapscan_open: performing scanner self test.
[snapscan] send_diagnostic
[snapscan] snapscan_cmd
[snapscan] sanei_usb_cmd(33,0x7ffff828,6,0x0,0x0 (0))
[snapscan] atomic_usb_cmd(33,0x7ffff828,6,0x0,0x0 (0))
[snapscan] usb_cmd(33,0x7ffff828,6,0x0,0x0 (0))
[snapscan] sane_snapscan_open: self test passed.
[snapscan] inquiry
[snapscan] snapscan_cmd
[snapscan] sanei_usb_cmd(33,0x80a1a68,6,0x80a1b68,0x80a9770 (120))
[snapscan] atomic_usb_cmd(33,0x80a1a68,6,0x80a1b68,0x80a9770 (120))
[snapscan] usb_cmd(33,0x80a1a68,6,0x80a1b68,0x80a9770 (120))
[snapscan] usb_cmd: cmdlen=6, datalen=0
[snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x78 0x00
[snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x41
0x47 ...
[snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[snapscan] inquiry: Chroma offsets Red:0, Green:0 Blue:0
[snapscan] inquiry: pixels per scan line = 5288
[snapscan] inquiry: bytes per scan line = 5288
[snapscan] inquiry: number of scan lines = 3429
[snapscan] inquiry: effective buffer size = 31728 bytes, 9 lines
[snapscan] inquiry: expected total scan data: 18132552 bytes
[snapscan] close_scanner
[snapscan] usb_close(33)
[snapscan] sane_snapscan_control_option (0x80a1a30, 0, 0, 0x7ffffa10, (nil))
[snapscan] open_scanner
[snapscan] usb_open(/dev/usbscanner)
[snapscan] close_scanner
[snapscan] usb_close(33)
[snapscan] sane_snapscan_get_option_descriptor (0x80a1a30, 1)
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Thu Mar 22 2001 - 10:10:50 PST