Hi,
sane-umax-1.0.4-build-25 is available.
You can download it from:
http://www.rauch-domain.de/sane-umax
Bye
Oliver
CHANGES:
* dev->lamp_control_available is preset to 0
* dev is erased (0) after it is allocated
* added special options for PowerLook 3000:
- calibration is done for each CCD pixel
- calibration_bytespp is set to 1
the scanner still is not listed as supported scanner because
the changes are not tested
* added options that are read from umax.conf:
- execute-request-sense:
values: 0=disabled, 1=enabled, default=0
If set to 1 umax_do_request_sense is called in umax_do_calibration.
This can hang the system (but has been enabled until this version)
- scsi-buffer-size-min, scsi-buffer-size-max:
values: 4096-1048576, default min=65536, max=131072
- scan-lines, preview-lines:
values: 1-65535, default scan-lines=40, preview-lines=10
define the maximum number of lines that are scanned into one buffer
- force-preview-bit-rgb:
values: 0=disabled, 1=enabled, default=0
set preview bit in rgb real scan
- slow-speed, care-about-smearing:
values: -1=auto, 0=disabled, 1=enabled, default=-1
dangerous options, needed for some scanners
- calibration-full-ccd:
values: -1=auto, 0=disabled, 1=enabled, default=-1
do calibration for each pixel of ccd instead of selected image
- calibration-width-offset:
values: -1=disabled, >=0 set value
add an offset width to the calculated with for image/ccd
- calibration-bytes-pixel:
values: -1=disabled, 0=not set, 1=1 byte/pixel, 2=x bytes/pixel
use # bytes per pixel for calibration
- invert-shading-data:
values: -1=auto, 0=disabled, 1=enabled, default=-1
invert shading data before sending it back to the scanner
- lamp-control-available:
values: 0=automatically set by driver - if known, 1=available, default=0
* updated html-documentation
* updated sane-umax.man
* added pre focus options (PowerLook 3000):
- FP - fix focus position
- FDC - lens calibration in doc position
- PF - disable pre focus
- LCL - use 0.6/0.0mm holder focus position
* added #define SANE_I18N(text) text to umax.c. This is to mark the backend
specific texts that shall be translated by the frontend
-- Homepage: http://www.rauch-domain.de sane-umax: http://www.rauch-domain.de/sane-umax xsane: http://www.xsane.org E-Mail: mailto:Oliver.Rauch@rauch-domain.de-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Sun Mar 04 2001 - 13:53:55 PST