Hi...
I'm near desperation. Also, I'm frustrated, as everything seems to be ok, still
I cannot scan.
Short:
-Scanner is connected.
-Device (dev/usbscanner) is created
-Firmware was uploaded and confirmed
-scanimage (any parameters) reports no SANE devices
Logs:
----Agfafirm reports:
Scanner Information (from scanner)
Vendor: AGFA
Version: 1.30
Model: SNAPSCAN 1212U_2
Firmware date: Mon Jun 14 1999 12:48
----dmesg reports:
usb.c: registered new driver usbscanner
scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 6bd:2061
usb.c: usbscanner driver claimed interface c18275c0
scanner.c: USB Scanner support registered.
----proc says:
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=06bd ProdID=2061 Rev= 1.1e
S: Manufacturer=AGFA
S: Product= Snapscan1212u_2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 16ms
Any suggestions as to what to do? I am particularly confused as to those messages
which mention the necessity for SCSI. SCSI generic support is compiled in, as I
need it for CD-RW and for a ZIP drive. But do I have to use a SCSI device (which one?)
or usbscanner (used this)
John
---- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Mon Dec 18 2000 - 07:57:44 PST