Re: Poblems with Epson 1200 usb

From: Paul van der Vlis (paul@vandervlis.nl)
Date: Fri Dec 15 2000 - 11:07:00 PST

  • Next message: Paul van der Vlis: "Re: Poblems with Epson 1200 usb"

    Karl Heinz Kremer wrote:

    > You need a newer version of SANE. I was still working on the USB support
    > when 1.0.2 came out. You should either get the 1.0.3 version or the
    > latest pre-1.0.4 snapshot.
    >
    > When you install the new SANE version make sure that you remove the
    > SuSE version first (as root with "rpm -e sane")

    I did that, but it still doesn't work:

    ---
    bash-2.04# /usr/local/bin/scanimage -L -v
    [epson] Unknown type  or level @, using B3
    device `epson:/dev/usbscanner0' is a Epson Perfection1200 flatbed
    scanner
    bash-2.04# /usr/local/bin/xscanimage /dev/usbscanner0
     
    Gtk-CRITICAL **: file gtkmain.c: line 534 (gtk_main_quit): assertion
    `main_loops != NULL' failed.
    bash-2.04# /usr/local/bin/xscanimage
    [epson] Unknown type or level, using B3
    Segmentation fault
    bash-2.04#                                
    ---
    bash-2.04# cat /proc/bus/usb/devices
    T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
    B:  Alloc= 11/900 us ( 1%), #Int=  1, #Iso=  0
    D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 0.00
    S:  Product=USB UHCI-alt Root Hub
    S:  SerialNumber=b400
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
    T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 4
    D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=058f ProdID=9254 Rev= 1.00
    S:  Manufacturer=ALCOR
    S:  Product=Generic USB Hub
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
    T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
    D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
    P:  Vendor=04b8 ProdID=0104 Rev= 1.03
    S:  Manufacturer=EPSON
    S:  Product=Perfection1200
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  2mA
    I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbsc
    E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
    bash-2.04#             
    ------
    

    Bye, Paul.

    -- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com



    This archive was generated by hypermail 2b29 : Fri Dec 15 2000 - 12:21:11 PST