Re: Snapscan 310 resolution problem

From: Timo Hoderlein (timo.hoderlein@wanadoo.es)
Date: Tue Nov 28 2000 - 13:56:07 PST

  • Next message: Chris Bagwell: "Re: Snapscan 310 resolution problem"

    Hi Cris,

    > I haven't heard of this problem before. Not sure what could be causing it. Perhaps a scsi driver problem there???

    I just built a customized kernel 2.2.14 (the other one the prebuilt
    kernel of the Mandrake distribution) with the generic SCSI support as
    module and my aix7xxx-driver at "Y" and it still shows the same
    problems.
    Any other suggestions?
    >
    > > In colour mode the scanner works fine up > to
    > > a resolution of 150 dpi. With the resolution at 200 dpi and 300 dpi > the
    > > scanner just hangs when klicking on the Scan button.
    >
    > If its been a couple of weeks then you will want to grab the latest
    > version of CVS as of 11-27-00. That includes an update for colour
    > mode at higher resolutions (at least for my scanner). With my
    > scanner, starting around 300 dpi the scanner can lock up right
    > at the beginng when it calles mesasure_transfer_rate. You can
    > verify this yourself by setting SANE_DEBUG_SNAPSCAN to 255.
    >
    > Anyways, there is a workaround for the problem in current CVS.
    > Hopefully, someone will have time to look into it better since
    > the current fix could cause invalid expected byte calcs and cause
    > the scanner to lock up in other places.

    How and where do I get the latest CVS? And what is this CVS good for?

    Thanks

    Timo 

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Tue Nov 28 2000 - 13:57:26 PST