DEVOM Blackwidow 9636PRO scanner

From: Paul Stear (paul@appjaws.co.uk)
Date: Mon Jul 31 2000 - 03:02:14 PDT

  • Next message: Jean-Charles de Longueville: "Re: DEVOM Blackwidow 9636PRO scanner"

    Hi to all on the list.

    I am sorry if this post is a duplicate, but I haven't seen any replies (my
    fault). Please help if you can

    Can anybody please help me to get my scanner working, details are as
    follows:

    The scsi card supplied with my DEVCOM 9636PRO scanner did not work
    with linux, so I have now installed an AdvanSys card which seems to
    be working ok as the following from boot.msg shows.

    <4>scsi0 : AdvanSys SCSI 3.2M: PCI Ultra 16 CDB: IO E000/F, IRQ 5
    <4>scsi : 1 host.
    <4> Vendor: DEVCOM Model: 9636PRO Rev: 3.69
    <4> Type: Scanner ANSI SCSI revision: 02
    <4>scsi : detected total.

    cat proc/scsi/scsi shows:-
    Attached devices:
    Host: scsi0 Channel: 00 Id: 02 Lun: 00
      Vendor: DEVCOM Model: 9636PRO Rev: 3.69
      Type: Scanner ANSI SCSI revision: 02

    ls -l /dev/sg* shows :-
    crw-rw---- 1 root scanner 21, 0 Mar 24 21:57 /dev/sg0
    crw-r----- 1 root disk 21, 1 Mar 24 21:57 /dev/sg1
    crw-r----- 1 root disk 21, 10 Mar 24 21:57 /dev/sg10
    crw-r----- 1 root disk 21, 11 Mar 24 21:57 /dev/sg11
    crw-r----- 1 root disk 21, 12 Mar 24 21:57 /dev/sg12
    crw-r----- 1 root disk 21, 13 Mar 24 21:57 /dev/sg13
    crw-r----- 1 root disk 21, 14 Mar 24 21:57 /dev/sg14
    crw-r----- 1 root disk 21, 15 Mar 24 21:57 /dev/sg15
    crw-r----- 1 root disk 21, 2 Mar 24 21:57 /dev/sg2
    crw-r----- 1 root disk 21, 3 Mar 24 21:57 /dev/sg3
    crw-r----- 1 root disk 21, 4 Mar 24 21:57 /dev/sg4
    crw-r----- 1 root disk 21, 5 Mar 24 21:57 /dev/sg5
    crw-r----- 1 root disk 21, 6 Mar 24 21:57 /dev/sg6
    crw-r----- 1 root disk 21, 7 Mar 24 21:57 /dev/sg7
    crw-r----- 1 root disk 21, 8 Mar 24 21:57 /dev/sg8
    crw-r----- 1 root disk 21, 9 Mar 24 21:57 /dev/sg9
    lrwxrwxrwx 1 root root 3 Jul 2 19:37 /dev/sga -> sg0
    lrwxrwxrwx 1 root root 3 Jul 2 19:37 /dev/sgb -> sg1
    lrwxrwxrwx 1 root root 3 Jul 2 19:37 /dev/sgc -> sg2
    lrwxrwxrwx 1 root root 3 Jul 2 19:37 /dev/sgd -> sg3

    ls -l /dev/scanner shows :-
    lrwxrwxrwx 1 root root 3 Jul 11 13:01 /dev/scanner -> sg0

    xscanimage errors with - no devices available
    xsane errors with - no devices available
    sane errors with command not found

    Please help to point me in the right direction
    Thanks
    regards
    Paul 

    -- 
This message was sent from Mandrake LINUX running KMail

    Have a nice day!

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Mon Jul 31 2000 - 03:48:41 PDT