xcam/xcanimage cannot se the scanner (sane 1.0.2)

From: Bernhard Mogens Ege (bme@vision.auc.dk)
Date: Fri Jul 21 2000 - 06:52:05 PDT

  • Next message: Oliver Rauch: "Re: Date of sane-CVS-Info-Mails"

    Sane 1.0.2 xcam or xscanimage cannot see my scanner, A HP PhotoSmart
    Photo Scanner connected via SCSI bus.

    cat /proc/scsi/scsi
    Attached devices:
    Host: scsi0 Channel: 00 Id: 02 Lun: 00
      Vendor: HP Model: C5100A Rev: R032
      Type: Processor ANSI SCSI revision: 02

    cat /proc/scsi/sym53c4/0
    Symbios Logic 53c416 (rev. 0) at 0x300, irq 5, SCSI-ID 7, fast pio

    Running xcam (LD_LIBRARY_PATH=/pack-linux86/sane-1.0.2/lib/sane/
    /pack-linux86/sane-1.0.2/bin/xcam), Devices->Specify Device name,
    entering /dev/sga, clicking OK, results in this
    message:

    Error:
    Failed to open device '/dev/sga'. Invalid argument.
    OK

    No matter what I try, I always get that error box.

    ls -l /dev/sga /dev/scanner
    lrwxrwxrwx 1 root root 3 Jul 21 13:12 /dev/scanner -> sga
    crw-rw---- 1 root scanner 21, 0 May 5 1998 /dev/sga

    /sbin/scsi_info /dev/sga
    SCSI_ID="0,2,0"
    MODEL="HP C5100A"
    FW_REV="R032"

    I am lost. What am I doing wrong? Or missing?

    regards,

    Bernhard Ege 

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Fri Jul 21 2000 - 06:55:34 PDT