I'm trying to get my Microtek Scanmaker E3 Plus working with sane.
The scanner is recognized by the kernel during boot up with the following:
scsi0 : AM53/79C974 PCscsi driver rev. 0.5; host I/O address: 0xda00; irq:
9
scsi : 1 host.
Vendor: IOMEGA Model: ZIP 100 Rev: H.14
Type: Direct-Access ANSI SCSI revision: 02
Vendor: Model: Scanner 300A4 Rev: 3.00
Type: Scanner ANSI SCSI revision: 02
Detected scsi generic sgb at scsi0, channel 0, id 6, lun 0
When I run find-scanner, I get this:
find-scanner: found scanner " Scanner 300A4 3.00" at device /dev/scanner
find-scanner: found scanner " Scanner 300A4 3.00" at device /dev/sg1
But when I run scanimage --list-devices I get nothing. After setting
SANE_DEBUG_MICROTEK2=128, I get this:
[microtek2] sane_init: Microtek2 (v0.6) says hello...
[microtek2] attach_one: name='# See sane-microtek2(5) for a description of
the options
'
[microtek2] add_device_list: device='# See sane-microtek2(5) for a
description of the options'
[microtek2] add_device_list: Comment or empty line in microtek2.conf
[microtek2] attach_one: returning
[microtek2] attach_one: name='option dump 1
'
[microtek2] add_device_list: device='option dump 1'
[microtek2] attach_one: returning
[microtek2] attach_one: name='# option lightlid-35 on
'
[microtek2] add_device_list: device='# option lightlid-35 on'
[microtek2] add_device_list: Comment or empty line in microtek2.conf
[microtek2] attach_one: returning
[microtek2] attach_one: name='# option no-backtrack-option on
'
[microtek2] add_device_list: device='# option no-backtrack-option on'
[microtek2] add_device_list: Comment or empty line in microtek2.conf
[microtek2] attach_one: returning
[microtek2] attach_one: name='/dev/sg1'
[microtek2] add_device_list: device='/dev/sg1'
[microtek2] attach: device='/dev/sg1'
[microtek2] scsi_inquiry: mi=0x8077834, device='/dev/sg1'
[microtek2] check_inquiry: mi=0x8077834
[microtek2] check_inquiry: Model 0x90 not supported
[microtek2] attach_one: returning
[microtek2] attach_one: name='/dev/sg1'
[microtek2] add_device_list: device='/dev/sg1'
[microtek2] add_device_list: device '/dev/sg1' already in list
[microtek2] attach_one: returning
[microtek2] sane_get_devices: local_only=0
[microtek2] attach: device='/dev/sg1'
[microtek2] scsi_inquiry: mi=0x8077834, device='/dev/sg1'
[microtek2] check_inquiry: mi=0x8077834
[microtek2] check_inquiry: Model 0x90 not supported
[microtek2] sane_get_devices: attach status 'Error during device I/O'
[microtek2] sane_get_devices: returning
[microtek2] sane_exit:
[microtek2] sane_get_devices: local_only=0
[microtek2] sane_get_devices: sd_list_freed
[microtek2] sane_exit: MICROTEK2 says goodbye.
Any ideas?
Jeff Jones
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Thu Jul 06 2000 - 06:57:36 PDT