Hi!
> I just bought a Mustek SE12000 SP Plus and tried to get it to work under
> RedHat 6.2 but failed.
> Here is my setup:
I have the same scanner. It works.
> I have an Adaptec AH-2940 SCSI controller to wich an internal CD writer
> (id 4) and the
I have a Smynantec 875 and a CD writer on ID 4 and my scanner is ID 6.
Almost the same as you have.
> scanner (id 6) is connected:
> [root@dopefish /root]# cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
> Vendor: GENERIC Model: CD-R CRD-R800S Rev: 1.10
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
> Vendor: SCANNER Model: Rev: V101
> Type: Scanner ANSI SCSI revision: 01 CCS
my cat /proc/scsi/scsi is (I have Kernel 2.2.16):
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: SCANNER Model: Rev: V100
Type: Scanner ANSI SCSI revision: 01 CCS
Output of "dir /dev/scanner":
lrwxrwxrwx 1 root scanner 3 Jan 14 14:47 /dev/scanner -> sg1
> I have RedHaat 6.2 + updates (including the 2.2.16 kernel). I compiled
> the sane 1.0.2 and
> xsane 0.57 (since it was claimed to be the stable version).
>
> I tried
>
> [root@dopefish /root]# scanimage -L
my Output:
device `mustek:/dev/scanner' is a Mustek ScanExpress 12000SP (Plus) flatbed
scanner
> but got nothing (should'nt I at least get the two virtual devices!?)
Only if you enabled the dummy PNM backend.
Are you sure your mustek.conf file is correct (containinng correct devices)
and that your dll.conf file of sane contains the mustek backend ?
> Next I figured that the correct device should be /dev/sgb and linked it
> to scanner.
> I tried again but with the same result.
>
> [root@dopefish /root]# scanimage -T -d /dev/sgb
> scanimage: open of device /dev/sgb failed: Invalid argument
>
> I looked at the man pages (sane-mustek sane-scsi) but couln't find any
> information.
> The scanner works under windows (but I'd rather whipe it off my disk
> again).
> Hence I try to get some help on this list.
>
> Any comments are highly appreciated!
> Thanks,
> Gerald
--Joachim
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Wed Jun 28 2000 - 16:25:55 PDT