Mustek MFS-6000SP and ava-1505 just scans in Black...

From: Christian Stocker (chregu@phant.ch)
Date: Wed May 24 2000 - 01:29:27 PDT

  • Next message: Claude Lefrancois: "Microtek ScanMaker E3 -> crashes the computer"

    Hello

    I have Suse 6.3 with kernel 2.2.13, a mustek MFS-6000SP scanner (it's
    labelled trust imagery 1200SP on the front, but on the back mfs-6000sp), a
    adaptec ava-1505 scsi card and a zip drive attached to that. it's all
    recognized well by the system (cat /proc/scsi/scsi:
    Host: scsi0 Channel: 00 Id: 04 Lun: 00
      Vendor: MUSTEK Model: MSF-06000SP Rev: 2.02
      Type: Scanner ANSI SCSI revision: 01
    Host: scsi0 Channel: 00 Id: 05 Lun: 00
      Vendor: IOMEGA Model: ZIP 100 Rev: D.09
      Type: Direct-Access ANSI SCSI revision: 02
    )
    and the zip drive is working.

    But if i want to scan a picture with color or grayscale with xsane or
    scanimage it just gives me a black picture back. lineart works.

    I'm using the latest sane,xsane and mustek-backend versions.

    the 'scanimage -L ' output (in debug mode) is attached below.

    Any idea, how I bring this scanner to work?

    thanks

    chregu

    sacnimage -L output
    ******************
    [sanei_init_debug]: Setting debug level of mustek to 4.
    [mustek] SANE Mustek backend version 1.0 build 83 (SANE 1.0.2)
    [mustek] sane_init: reading config file `mustek.conf'
    [mustek] sane_init: config file line 3: strip-height set to 1 inches
    [mustek] sane_init: config file line 5: trying to attach `scsi MUSTEK *
    Scanner'
    [mustek] attach: trying device /dev/sga
    [mustek] dev_open: /dev/sga is a SCSI device
    [mustek] dev_open: wanted 8 kbytes, got 8 kbytes buffer
    [mustek] attach: SCSI Vendor: `MUSTEK ' Model: `MSF-06000SP '
    Rev.: `2.02'
    [mustek] attach: SCSI Type: Scanner; ANSI rev.: 1
    [mustek] attach: SCSI flags:
    [mustek] attach: inquiry output:
    [mustek] 06 10 21 00 5b 00 00 00 4d 55 53 54 45 4b ff ff
    ..!.[...MUSTEK..
    [mustek] 4d 53 46 2d 30 36 30 30 30 53 50 ff ff ff ff ff
    MSF-06000SP.....
    [mustek] 32 2e 30 32 4d 49 43 48 41 45 4c 20 54 53 41 49 2.02MICHAEL
    TSAI
    [mustek] ff ff ff ff ff ff ff ff 00 cf ff ff 01 00 00 00
    ................
    [mustek] 01 03 01 01 00 00 00 00 00 00 00 00 00 00 00 00
    ................
    [mustek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
    ................
    [mustek] attach: found Mustek scanner (old firmware format)
    [mustek] attach: old firmware revision system
    [mustek] attach: firmware revision 2.02
    [mustek] attach: scanner id: MSF-06000SP
    [mustek] attach: this is probably a Paragon series scanner
    [mustek] attach: scanner has automatic line-distance correction
    [mustek] attach: this is a single-pass scanner
    [mustek] attach: found Mustek MFS-6000SP flatbed scanner, 1-pass
    [mustek] sane_init: config file line 6: enabling linedistance-fix for
    /dev/sga
    [mustek] sane_init: config file line 7: enabling lineart-fix for /dev/sga
    [mustek] sane_init: config file line 9: trying to attach `scsi SCANNER'
    [mustek] sane_init: config file line 10: option linedistance-fix ignored,
    was set before any device name
    [mustek] sane_init: config file line 11: option lineart-fix ignored, was
    set before any device name
    [mustek] sane_init: config file line 13: trying to attach `/dev/scanner'
    [mustek] attach: trying device /dev/scanner
    [mustek] dev_open: /dev/scanner is a SCSI device
    [mustek] dev_open: wanted 8 kbytes, got 8 kbytes buffer
    [mustek] attach: SCSI Vendor: `MUSTEK ' Model: `MSF-06000SP '
    Rev.: `2.02'
    [mustek] attach: SCSI Type: Scanner; ANSI rev.: 1
    [mustek] attach: SCSI flags:
    [mustek] attach: inquiry output:
    [mustek] 06 10 21 00 5b 00 00 00 4d 55 53 54 45 4b ff ff
    ..!.[...MUSTEK..
    [mustek] 4d 53 46 2d 30 36 30 30 30 53 50 ff ff ff ff ff
    MSF-06000SP.....
    [mustek] 32 2e 30 32 4d 49 43 48 41 45 4c 20 54 53 41 49 2.02MICHAEL
    TSAI
    [mustek] ff ff ff ff ff ff ff ff 00 cf ff ff 01 00 00 00
    ................
    [mustek] 01 03 01 01 00 00 00 00 00 00 00 00 00 00 00 00
    ................
    [mustek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
    ................
    [mustek] attach: found Mustek scanner (old firmware format)
    [mustek] attach: old firmware revision system
    [mustek] attach: firmware revision 2.02
    [mustek] attach: scanner id: MSF-06000SP
    [mustek] attach: this is probably a Paragon series scanner
    [mustek] attach: scanner has automatic line-distance correction
    [mustek] attach: this is a single-pass scanner
    [mustek] attach: found Mustek MFS-6000SP flatbed scanner, 1-pass
    [mustek] sane_init: config file line 14: enabling linedistance-fix for
    /dev/scanner
    [mustek] sane_init: config file line 15: enabling lineart-fix for
    /dev/scanner
    [mustek] sane_get_devices
    [mustek] sane_exit 

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Wed May 24 2000 - 01:27:49 PDT