Den Mon, 08 May 2000 skrev du:
> Hi Johan, Hi everyone.
>
> Yes, have same combination and with xsane 0.59 the image jumps about if you
> try to do anything to it. I use xsane 0.57 for transparancies.
Thanks for your reply -that's interesting. I've used the 4-5 latest xsane
releases and I've had the same problem with all of them. Maybe I could try a
really old version and see if that makes any difference.
> BTW I find I need maximum gamma, 3, and loads of gimp manipulation to get
> anywhere decent scans from 35mm slides. Have SuSE 6.4 with Adaptec 2904
I've tried scanning mostly b/w negs, 35 mm & 6x6. The "Autoadjust gamma ..."
button is very useful, but I usually have to some manual adjustments as well.
Maximum resolution is a must as well!
This doesn't bother me at all - it's a piece of cake compared to working in a
conventional darkroom!;-)
I've used three different scsi adapters: IOI-4203U (Initio chipset, PCI, with
bios), Adaptec 1505 ISA (this one should work according to both
support.umax.co.uk and sane docs) and the DOMEX card that's delivered with the
scanner. Same problems with all of them.
Johan
>
> Steve.
>
> ----------
> > De: Johan Bengtsson <johanb@lls.se>
> > A: sane-devel@mostang.com
> > Asunto: Umax 1220S + Transparency adapter + XSANE
> > Fecha: domingo 7 de mayo de 2000 18:00
> >
> > Hi,
> >
> > I wondering if there is anybody on the list using this combination
> successfully.
> > This scanner always works fine for me when when I'm using it in
> reflective mode.
> > Scanning with the UTA also works well when I use it under Windows NT or
> with
> > xscanimage. But with xsane I'm having problems. It doesn't scan the area
> I
> > select in preview, and sometimes the preview image is distorted. When I
> use the
> > "Autoadjust gamma..." button the preview image will move a bit. Once I
> got a
> > good scan after removing the .xsane directory, but that didn't last...
> >
> > It has been suggested to me that the problem could be scsi related, but I
> have
> > tried three different cards, checked termination, changed settings in
> scsi
> > adapters bios, checked for resource conflicts etc. with no sign of
> > improvement. I have also this week reinstalled my whole system, going
> from
> > Redhat 6.0 --> Open Linux 2.4 - didn't help either. I'm running the
> latest
> > versions of SANE & XSANE.
> >
> > Any clues?
> >
> > I'm very grateful for any help!
> >
> > Regards,
> > Johan Bengtsson
> >
> > =======================================================
> > E-mail @ home: johanb@lls.se ICQ: 27505976
> > Personal website:
> > http://www.lls.se/~johanb/
> > Fotografiska föreningen i Göteborg:
> > http://www.netg.se/ffg/
> > Tent Of Miracles - the unofficial homepage of the legendary band
> Spirit:
> > http://www.lls.se/~johanb/spirit/
> > August - free html editor for Unix/Linux:
> > http://www.lls.se/~johanb/august/
> > =======================================================
> >
> >
> > --
> > Source code, list archive, and docs: http://www.mostang.com/sane/
> > To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
>
> --
> Source code, list archive, and docs: http://www.mostang.com/sane/
> To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
--
=======================================================
E-mail @ home: johanb@lls.se ICQ: 27505976
Personal website:
http://www.lls.se/~johanb/
Fotografiska föreningen i Göteborg:
http://www.netg.se/ffg/
Tent Of Miracles - the unofficial homepage of the legendary band Spirit:
http://www.lls.se/~johanb/spirit/
August - free html editor for Unix/Linux:
http://www.lls.se/~johanb/august/
=======================================================
--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Mon May 08 2000 - 13:31:12 PDT