Re: New Mustek backend available (1.0-79)

From: Per Aalrust (PerAalrust@t-online.de)
Date: Fri Apr 21 2000 - 15:26:13 PDT

  • Next message: Brent Rector: "Sane installation on FreeBSD v3.4 problems"

    Hi!

    I have tested the new Mustek backend (1.0-79) on SuSE 6.3
    (kernel 2.2.13) with sane 1.0.2. The #define SG_BIG_BUFF 130559
    is set in /usr/include/scsi/sg.h. The scanner reports 65490 bytes to
    read.

    My hardware is a Mustek ScanExpress 12000 SP (firmware 1.01) with a DTCT
    436-P scsi-adapter that came along with the scanner and 128 MB RAM.

    Scanning in lineart mode works fine, even the preview in xscanimage is
    correct.

    Scanning in gray or color mode does not work good. Scans with a
    resolution above 150 dpi in gray mode are horizontal shifted and look
    like a puzzle.
    Scans in color mode even with a resolution of 75 dpi are horizontal
    shifted, have some horizontal stripes and the color is not correct.

    I have tried the option linedistance-fix, but that does not make any
    difference. The option strip-height is set to 1. Changing that value
    does not change anything.

    Best regards
    Per 

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Fri Apr 21 2000 - 15:22:50 PDT