Hi Peter,
Thanks for the reply.
> can you also try the hp-backend from my homepage. Previous versions of
> the backend had problems with HP CDwriters on the same SCSI bus.
>
The CDwriter is a TEAC.
I tried your new backend, but it fails in the same way.
I suspect the system cannot even locate the scanner.
I have attached the output fromthe commands.
Regards
Ray
> > ====================================================
srsunm:/home/apps/sane-1.00>xscanimage
xscanimage: no devices available.
Gtk-CRITICAL **: file gtkmain.c: line 534 (gtk_main_quit): assertion `main_loops != NULL' failed.
srsunm:/home/apps/sane-1.00>
> > ====================================================
srsunm:/home/apps/sane-1.00>xscanimage hp
Failed to open device 'hp': invalid argument
Gtk-CRITICAL **: file gtkmain.c: line 534 (gtk_main_quit): assertion `main_loops != NULL' failed.
srsunm:/home/apps/sane-1.00>
> > ====================================================
srsunm:/home/apps/sane-1.00>scanimage
scanimage: no SANE devices found
srsunm:/home/apps/sane-1.00>
> > ====================================================
srsunm:/home/apps/sane-1.00/tools>find-scanner -v
find-scanner: searching for scanners:
find-scanner: checking /dev/scg0a...
find-scanner: checking /dev/scg0b...
find-scanner: checking /dev/scg0c...
find-scanner: found disk " " at device /dev/scg0c
find-scanner: checking /dev/scg0d...
find-scanner: checking /dev/scg0e...
find-scanner: found disk " " at device /dev/scg0e
find-scanner: checking /dev/scg0f...
find-scanner: checking /dev/scg0g...
find-scanner: found disk " " at device /dev/scg0g
find-scanner: checking /dev/scg1a...
find-scanner: checking /dev/scg1b...
find-scanner: checking /dev/scg1c...
find-scanner: checking /dev/scg1d...
find-scanner: checking /dev/scg1e...
find-scanner: checking /dev/scg1f...
find-scanner: checking /dev/scg1g...
find-scanner: checking /dev/scg2a...
find-scanner: checking /dev/scg2b...
find-scanner: checking /dev/scg2c...
find-scanner: checking /dev/scg2d...
find-scanner: checking /dev/scg2e...
find-scanner: checking /dev/scg2f...
find-scanner: checking /dev/scg2g...
find-scanner: checking /dev/sg/0...
find-scanner: checking /dev/sg/1...
find-scanner: checking /dev/sg/2...
find-scanner: checking /dev/sg/3...
find-scanner: checking /dev/sg/4...
find-scanner: checking /dev/sg/5...
find-scanner: checking /dev/sg/6...
find-scanner: done
srsunm:/home/apps/sane-1.00/tools>
> > ====================================================
> > Hi Peter,
> > It is an HP Scanjet 5P.
> > This is the output from the cdrecord software,
> > which uses the CDwriter, which is on the same bus.
> > The cd software has a scanbus option.
> > The scsi driver is the Jorg Schilling one.
> > The CDwriter works fine
> >
> > Regards
> > Ray
> > ====================================================
> > srsunm#/dev>cdrecord -scanbus
> > Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling
> > scsibus0:
> > 0) 'SEAGATE ' 'ST32155W ' '0596' Disk
> > 1) *
> > 2) 'HP ' 'C5110A ' '3701' Processor
> > 3) *
> > 4) 'ARCHIVE ' 'VIPER 150 21531' '-004' Removable Tape
> > 5) *
> > 6) 'TEAC ' 'CD-R56S ' '1.0F' Removable CD-ROM
> > 7) *
> > srsunm#/dev>
> > ====================================================
> >
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 16:33:52 PST