Mustek ES12000SP Plus.... once again

From: franck (fvill@eleftheria.stcloudstate.edu)
Date: Wed Jan 05 2000 - 13:57:58 PST

  • Next message: Karl Heinz Kremer: "Re: Success! EPSON1200S"

    ----------------------------------
    E-Mail: franck <fvill@eleftheria.stcloudstate.edu>
    Date: 05-Jan-00
    Time: 22:38:02

    This message was sent by XFMail
    ----------------------------------

    Sorry to e-mail once again but i thought that my first e-mail wasn't clear
    enough.
    My scsi host adapter is a Tekram DC 390 and my kernel is compiled with build-in
    scsi support. I also compiled as molude scsi generic support.
    The scanner is a MUSTEK ES 12000SP PLUS.
    The /proc/scsi/scsi file looks :
    Attached devices:
    Host: scsi0 Channel: 00 Id: 06 Lun: 00
      Vendor:SCANNER Model: Rev: V101
      Type: Scanner ANSI SCSI revision: 01 CCS

    When I type find-scanner I got this results:
    find-scanner: found scanner "SCANNER V101" at device /dev/sga
    find-scanner: found scanner "SCANNER V101" at device /dev/sg0

    But when I type scanimage -L I got this results
    scanimage - L
    devices:
    pnm:0 pnm:1

    And if I type : export SANE_DEBUG_MUSTEK=3;scanimage -d mustek >/dev/null
    results are:
    [root@localhost franck]# export SANE_DEBUG_MUSTEK=3;scanimage -d mustek >/dev/nu
    ll
    [sanei_init_debug]: Setting debug level of mustek to 3.
    [mustek] sane_init: strip-height set to 1 inches
    [mustek] attach: opening /dev/sga as scsi device
    [mustek] attach: sending INQUIRY
    [mustek] scsi_wait_ready: sending TEST_UNIT_READY
    [mustek] attach: firmware revision 38.01
    [mustek] attach: unknown model `XC06 S12IDWM123797`A`b``'
    [mustek] attach: opening /dev/sga as scsi device
    [mustek] attach: sending INQUIRY
    [mustek] scsi_wait_ready: sending TEST_UNIT_READY
    [mustek] attach: firmware revision 38.01
    [mustek] attach: unknown model `XC06 S12IDWM123797`A`b``'
    [mustek] attach: opening /dev/sga as scsi device
    [mustek] attach: sending INQUIRY
    [mustek] scsi_wait_ready: sending TEST_UNIT_READY
    [mustek] attach: firmware revision 38.01
    [mustek] attach: unknown model `XC06 S12IDWM123797`A`b``'
    [mustek] attach: opening /dev/sga as scsi device
    [mustek] attach: sending INQUIRY
    [mustek] scsi_wait_ready: sending TEST_UNIT_READY
    [mustek] attach: firmware revision 38.01
    [mustek] attach: unknown model `XC06 S12IDWM123797`A`b``'
    [mustek] attach: opening /dev/scanner as scsi device
    [mustek] attach: sending INQUIRY
    [mustek] scsi_wait_ready: sending TEST_UNIT_READY
    [mustek] attach: firmware revision 38.01
    [mustek] attach: unknown model `XC06 S12IDWM123797`A`b``'
    scanimage: open of device mustek failed: Invalid argument

    I found the message of Thorsten Pfaff who said the same things.
    I would like to know what were the answers ?
    So how do I do to use my scanner ?

    Regards

    Franck

    --
    Source code, list archive, and docs: http://www.mostang.com/sane/
    To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    



    This archive was generated by hypermail 2b29 : Sun Jan 16 2000 - 10:01:04 PST