Hello Again,
I set the debug levels and got the following debug output from my system
when running scanimage. All that I get out of the following is that my
scanner is not responding to the SCL commands correctly (SCL == Scanner
Command Language, right?). So I am pretty sure that my configuration of
SANE is OK, but something else is definitely wrong... But like I mentioned
before, the scanner works fine under (egad) Windoze.
- my debug output -
[15:09:05]inigo:~ $ scanimage -d hp:/dev/scanner
[sanei_init_debug]: Setting debug level of dll to 128.
[dll] adding backend net
[dll] adding backend hp
[dll] loading backend hp
[dll] dlopen()ing `/usr/local/lib/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[sanei_init_debug]: Setting debug level of hp to 128.
[hp] init called
[hp] hp_read_config: hp backend v0.82 starts reading config file
[hp] hp_read_config: processing line <scsi HP>
[hp] hp_read_config: processing line </dev/scsi/sc1d5l0>
[hp] hp_read_config: attach scsi HP
[hp] hp_get_dev: New device /dev/scsi/sc1d5l0, connect-scsi,
scsi-request=1
[hp] scsi_inquire: sending INQUIRE
[hp] scsi_new: sending TEST_UNIT_READY
[hp] scsi_flush: writing 2 bytes:
0x0000 1B 45 .E
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[hp] scsi_read: 0 bytes:
[hp] scl_inq: malformed response: expected 's257d', got ''
[hp] scl_errcheck: Can't read SCL error stack: Error during device I/O
[hp] sanei_hp_device_new: SCL reset failed
[hp] scsi_close: closing fd 5
[hp] hp_read_config: attach /dev/scsi/sc1d5l0
[hp] hp_get_dev: New device /dev/scsi/sc1d5l0, connect-scsi,
scsi-request=1
[hp] scsi_inquire: sending INQUIRE
[hp] scsi_new: sending TEST_UNIT_READY
[hp] scsi_flush: writing 2 bytes:
0x0000 1B 45 .E
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[hp] scsi_read: 0 bytes:
[hp] scl_inq: malformed response: expected 's257d', got ''
[hp] scl_errcheck: Can't read SCL error stack: Error during device I/O
[hp] sanei_hp_device_new: SCL reset failed
[hp] scsi_close: closing fd 5
[hp] hp_device_info_get: device /dev/scanner not configured. Using default
[hp] hp_get_dev: New device /dev/scanner, connect-scsi, scsi-request=1
[hp] scsi_inquire: sending INQUIRE
[hp] scsi_new: sending TEST_UNIT_READY
[hp] scsi_flush: writing 2 bytes:
0x0000 1B 45 .E
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[hp] scsi_read: 0 bytes:
[hp] scl_inq: malformed response: expected 's257d', got ''
[hp] scl_errcheck: Can't read SCL error stack: Error during device I/O
[hp] sanei_hp_device_new: SCL reset failed
[hp] scsi_close: closing fd 4
scanimage: open of device hp:/dev/scanner failed: Error during device I/O
[dll] exiting
[dll] calling backend `hp's exit function
[hp] exit called
- end of my debug output -
As mentioned before, the OS is SGI IRIX v6.2. The machine is an SGI
Inidigo2 Impact Machine with an r4400 MIPS cpu (not that any of that
should matter - but what do I know...). I compiled using gcc and gmake.
Please give me a hint...
-Nick Floersch
zoontf@cs.ubishops.ca
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Fri Jan 14 2000 - 22:24:18 PST