sane and freebsd 3.2

Rick Knebel (rknebel@uplink.net)
Fri, 24 Sep 1999 21:00:36 -0400

Hi,
i have posted before about my scanner being recognized on bootup as pass4
but not having a /dev/pass4 in the dev directory.
It will not make a pass4 even if I try to make it.
I am running Freebsd 3.2


This is an exert from my bootup.
Waiting 15 seconds for SCSI devices to settle
pass4 at ahc0 bus 0 target 0 lun 0
pass4: <UMAX Astra 1220S V1.2> Fixed Scanner SCSI-2 device
pass4: 3.300MB/s transfers
changing root device to da1s1a
cd0 at ncr0 bus 0 target 6 lun 0
cd0: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device
cd0: 8.333MB/s transfers (8.333MHz, offset 31)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray c
losed
da2 at ncr0 bus 0 target 2 lun 0
da2: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da0 at ncr0 bus 0 target 0 lun 0
da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da1 at ncr0 bus 0 target 1 lun 0
da1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)


The scanner is on my second scsi card.

camcontrol devlist shows
<IBM DNES-309170W SA30> at scbus0 target 0 lun 0 (pass0,da0)
<IBM DNES-309170W SA30> at scbus0 target 1 lun 0 (pass1,da1)
<IOMEGA ZIP 100 J.03> at scbus0 target 2 lun 0 (pass2,da2)
<YAMAHA CRW4416S 1.0g> at scbus0 target 6 lun 0 (pass3,cd0)
<UMAX Astra 1220S V1.2> at scbus1 target 0 lun 0 (pass4) 

-- 
Rick Knebel
rknebel@uplink.net
http://rknebel.uplink.net



--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com