danke fuer das Hilfsangebot!
Hier noch eine kurze Beschribung der Symptome:
Scan-Versuch mit 'flatbed' ist OK.
Beim Umschalten auf TMA leutet obere Lampe (Durchlichtlampe),
der Scan-Wahgen durchlaeuft 2-3 mal das Kalibrierfeld.
(Bei Preview)
Dann haengt die ganze Kiste (Mauszeiger nicht mehr zu bewegen).
Nach Aus- und Wiedereinschalten des Scanners lebzt der Rechner wieder.
Gruss
Harald
Hier die gekuerzte Fassung des outputs:
[microtek2] ersetzt durch [] ,
sane_get_option_descriptor: Ausgaben geloescht (bis auf jeweils erste und letzte)
[microtec2] sane_start: handle=0x0x8130b88
[] get_scan_parameters: handle=0x8130b88
[] get_scan_mode_and_depth: handle=0x8130b88
[] get_scan_mode_and_depth: mode=5, depth=8, bits_pp_in=8, bits_pp_out=8, preview=1
[] get_scan_parameters: mode=5, depth=8, bpp_in=8, bpp_out=8
[] get_scan_parameters: yres=85, x1=0, width=3000, y1=0, height=3600
[] scsi_read_system_status: md=0x80c82b8, fd=28
[] scsi_read_system_status: md=0x80c82b8, fd=28
[] scsi_send_system_status: md=0x80c82b8, fd=28
[] get_lut_size: mi=0x80c83ac
[] get_lut_size: mi=0x80c83ac, lut_size=4096, lut_word=2
[] calculate_gamma: ms=0x8130b88, pos=0x81972d0, color=0, mode=None
[] calculate_gamma: factor=1, mult =4095.000000, steps=4095.000000, mode=None
[] calculate_gamma: ms=0x8130b88, pos=0x81992d0, color=1, mode=None
[] calculate_gamma: factor=1, mult =4095.000000, steps=4095.000000, mode=None
[] calculate_gamma: ms=0x8130b88, pos=0x819b2d0, color=2, mode=None
[] calculate_gamma: factor=1, mult =4095.000000, steps=4095.000000, mode=None
[] scsi_send_gamma: pos=0x81972d0, size=8192, word=1, color=3
[] scsi_set_window: ms=0x8130b88, wnd=1
[] scsi_read_image_info: ms=0x8130b88
[] scsi_read_image_info: ppl=425, bpl=1278, lines=510, remain=651780
[] scsi_wait_for_image: ms=0x8130b88
[] scsi_read_image_status: ms=0x8130b88
[] sane_get_parameters: handle=0x8130b88, params=0x8150118
[] sane_get_parameters: format=1, last_frame=1, lines=510
[] sane_get_parameters: depth=8, ppl=425, bpl=1275
[] reader_process: ms=0x8130b88
[] reader_process: transferlength=31950, lines=25, linelength=1278, real_bpl=1275, srcbuf=0x819d2d8
[] scsi_read_image: ms=0x8130b88
[] scsi_read_image: transferlength=31950
[] sane_set_io_mode: handle=0x8130b88, nonblocking=1
[] sane_get_select_fd: ms=0x8130b88
[] segreg_proc_data: ms=0x8130b88
[] segreg_proc_data: lines=25, bpl=1278, ppl=425, bpf=426, bpp=1, depth=8, pad=1, freelines=57
[] segreg_proc_data: unknown color indicator (1) 0x00
[] sane_get_option_descriptor: handle=0x8130b88, opt=10
....
[] sane_get_option_descriptor: handle=0x8130b88, opt=13
[] sane_cancel: handle=0x8130b88
[] sane_control_option: option=5, action=1, value=72.000000
[] sane_control_option: option=10, action=1, value=0.000000
[] sane_control_option: option=11, action=1, value=0.000000
[] sane_control_option: option=12, action=1, value=126.999985
[] sane_control_option: option=13, action=1, value=152.399994
[] sane_control_option: option=8, action=1, value=0
[] sane_get_option_descriptor: handle=0x8130b88, opt=0
.........
[] sane_get_option_descriptor: handle=0x8130b88, opt=53
[] sane_close: ms=0x8130b88
[] cleanup_scanner: ms=0x8130b88
[] sane_exit:
[] sane_get_devices: local_only=0
[] sane_get_devices: sd_list_freed
[] sane_exit: MICROTEK2 says goodbye.
-- Windows is not the answer. Windows is the question. The answer is LINUX! Harald Finster
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com