Debug output:
(starting up xscanimage...)
[mustek] sane_init: strip-height set to 1 inches
[mustek] attach: opening /dev/sga as scsi device
[mustek] attach: sending INQUIRY
[mustek] scsi_wait_ready: sending TEST_UNIT_READY
[mustek] attach: firmware revision 1.51
[mustek] attach: cover open
[mustek] attach: found Mustek scanner model MFS-08000SP (flatbed
scanner), 1-pass
[mustek] sane_init: enabling lineart-fix for /dev/sga
(scanning...)
[mustek] scsi_wait_ready: sending TEST_UNIT_READY
[mustek] do_inquiry: sending INQUIRY
[mustek] line_distance: got factor=65535, (r/g/b)=(0/8/16)
[mustek] get_image_status: bytes_per_line=942, lines=513
[mustek] lines_per_buffer=34, bytes_per_line=942
[mustek] reader: about to read 32028 bytes
[mustek] reader_process: line=34 (num_lines=513), num_reqs=1
[mustek] reader_process: 32028 bytes read.
[mustek] mustek.output_data: data=0x80a53f8, lpb=34, bpl=942,
extra=0x80ad118
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] read 4096 bytes
[mustek] read -1 bytes
[mustek] reader: about to read 32028 bytes
[mustek] reader_process: line=68 (num_lines=513), num_reqs=1
(etc...etc...etc...)
Anyone know of a solution? The scanner works fine in Windoze.
regards
[ bryce ]
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com