Interesting scsi problem

Brian Idzik (brian_idzik@admin.state.ak.us)
Sat, 06 Mar 1999 22:52:30 +0000

I've successfully installed sane 1.0 & am very excited about using it,
but I'm running into a bit of a problem with SCSI/scanner recognition.
I'm running RedHat 5.2 & it installs the aic78xx driver for the Adaptec
2920 PCI (fast scsi) card. On boot, the Adaptec card properly reports
the Mustek MFS-8000SP scanner (ID 6) on the bios check. RedHat 5.2
loads the aic78xx driver & it sees the scanner as a "disk" (type WORM).
(Message log follows:)

Mar 6 07:14:47 brian kernel: (scsi0) <Adaptec AIC-7850 SCSI host
adapter> found at PCI 3/0
Mar 6 07:14:47 brian kernel: (scsi0) Narrow Channel, SCSI ID=7, 3/255
SCBs
Mar 6 07:14:47 brian kernel: (scsi0) Warning - detected
auto-termination
Mar 6 07:14:47 brian kernel: (scsi0) Please verify driver detected
settings are correct.
Mar 6 07:14:47 brian kernel: (scsi0) If not, then please properly set
the device termination
Mar 6 07:14:47 brian kernel: (scsi0) in the Adaptec SCSI BIOS by
hitting CTRL-A when prompted
Mar 6 07:14:47 brian kernel: (scsi0) during machine bootup.
Mar 6 07:14:47 brian kernel: (scsi0) Cables present (Int-50 NO, Ext-50
YES)
Mar 6 07:14:47 brian kernel: (scsi0) Downloading sequencer code... 412
instructions downloaded
Mar 6 07:14:47 brian kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.2/3.2.4
Mar 6 07:14:47 brian kernel: <Adaptec AIC-7850 SCSI host
adapter>
Mar 6 07:14:47 brian kernel: scsi : 1 host.
Mar 6 07:14:47 brian kernel: Vendor:
Model: Rev:
Mar 6 07:14:47 brian kernel: Type:
WORM ANSI SCSI revision: 00
Mar 6 07:14:47 brian kernel: Detected scsi CD-ROM sr0 at scsi0, channel
0, id 6, lun 0

Any ideas on how to fix this? Thanks in advance for any advice. I'm 1
scanner driver away from abandoning winxx forever :)

--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com