I just want to inform you, that i was not able to scan with a microtek
Scanmaker E6. I used a AHA1522 SCSI-Card. If this was a Hardware or a
software-Problem is not for shure, because Windows was not able to use
the SCSI-Card. But i was able to use the SCSI-Adapter to read form a
mod-drive under Linux, so the the AHA should work. But in fact i have no
idea, if the SCSI-Adapter is installed Correctly. I got the following
message, when loading the module:
Jun 18 23:11:36 christian modprobe: Can't locate module scsi_hostadapter
Jun 18 23:11:46 christian kernel: aha152x: BIOS test: passed, auto
configuration: ok, detected 1 controller(s)
Jun 18 23:11:46 christian kernel: aha152x0: vital data: PORTBASE=0x340,
IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled,
Jun 18 23:11:46 christian kernel: aha152x: trying software interrupt,
ok.
Jun 18 23:11:46 christian kernel: scsi0 : Adaptec 152x SCSI driver;
$Revision: 1.18 $
Jun 18 23:11:46 christian kernel: scsi : 1 host.
Jun 18 23:11:47 christian kernel: Vendor: MICROTEK Model: ScanMaker
E6 Rev: 1.42
Jun 18 23:11:47 christian kernel: Type:
Scanner ANSI SCSI revision: 04
Jun 18 23:11:47 christian kernel: Detected scsi generic sga at scsi0,
channel 0, id 4, lun 0
Jun 18 23:12:52 christian kernel: Detected scsi generic sga at scsi0,
channel 0, id 4, lun 0
when trying to scan, the Computer simply looks up. If you have any idea,
how to get the stuff work, please mail me or the list.
Ciao
Christian
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com