Our lab just bought the Paragon 1200SP Pro scanner (2400x600 opt, 36 bit). It
appears that the mustek driver of Sane-0.62 doesn't recognize it. I attach the
debug output below.
Any help & tips are appreciated. I don't mind spending a couple of hours
tinkering with the code, though I have no experience with device drivers.
BTW, we have the transparancy adapter, too.
Regards,
Evgeny
--------------------------------
[sanei_init_debug]: Setting debug level of dll to 128.
[dll] adding backend pnm
[dll] adding backend mustek
[dll] adding backend hp
[dll] adding backend qcam
[dll] adding backend umax
[dll] loading backend mustek
[dll] load: found `/usr/local/lib/libsane-mustek.la'
[dll] dlopen()ing `/usr/local/lib/libsane-mustek.so.0'
[dll] init: initializing backend `mustek'
[sanei_init_debug]: Setting debug level of mustek to 128.
[mustek] sane_init: strip-height set to 1 inches
[mustek] attach: opening /dev/scanner
[sanei_init_debug]: Setting debug level of sanei_scsi to 128.
[mustek] attach: sending INQUIRY
[sanei_scsi] scsi_req_enter: entered 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ce18
[sanei_scsi] sanei_scsi.issue: 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: read 132 bytes
[mustek] wait_ready: sending TEST_UNIT_READY
[sanei_scsi] scsi_req_enter: entered 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ce18
[sanei_scsi] sanei_scsi.issue: 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[mustek] attach: firmware revision 1.00
[mustek] attach: opening /dev/scanner
[sanei_init_debug]: Setting debug level of sanei_scsi to 128.
[mustek] wait_ready: sending TEST_UNIT_READY
[sanei_scsi] scsi_req_enter: entered 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ce18
[sanei_scsi] sanei_scsi.issue: 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[mustek] attach: sending INQUIRY
[sanei_scsi] scsi_req_enter: entered 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ce18
[sanei_scsi] sanei_scsi.issue: 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: read 132 bytes
[mustek] wait_ready: sending TEST_UNIT_READY
[sanei_scsi] scsi_req_enter: entered 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804ce18
[sanei_scsi] sanei_scsi.issue: 0x804ce18
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[mustek] attach: firmware revision 1.00
scanimage: open of device mustek:/dev/scanner failed: Invalid argument
[dll] loading backend umax
[dll] load: found `/usr/local/lib/libsane-umax.la'
[dll] dlopen()ing `/usr/local/lib/libsane-umax.so.0'
[dll] init: initializing backend `umax'
[sanei_init_debug]: Setting debug level of sanei_scsi to 128.
[sanei_scsi] scsi_req_enter: entered 0x805d340
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x805d340
[sanei_scsi] sanei_scsi.issue: 0x805d340
[sanei_scsi] sanei_scsi_req_wait: read 41 bytes
[sanei_scsi] scsi_req_enter: entered 0x805d340
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x805d340
[sanei_scsi] sanei_scsi.issue: 0x805d340
[sanei_scsi] sanei_scsi_req_wait: read 132 bytes
[dll] loading backend qcam
[dll] load: found `/usr/local/lib/libsane-qcam.la'
[dll] dlopen()ing `/usr/local/lib/libsane-qcam.so.0'
[dll] init: initializing backend `qcam'
[dll] loading backend hp
[dll] load: found `/usr/local/lib/libsane-hp.la'
[dll] dlopen()ing `/usr/local/lib/libsane-hp.so.0'
[dll] init: initializing backend `hp'
[sanei_init_debug]: Setting debug level of sanei_scsi to 128.
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 291 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x8065488
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8065488
[sanei_scsi] sanei_scsi.issue: 0x8065488
[sanei_scsi] sanei_scsi_req_wait: read 164 bytes
[dll] loading backend pnm
[dll] load: found `/usr/local/lib/libsane-pnm.la'
[dll] dlopen()ing `/usr/local/lib/libsane-pnm.so.0'
[dll] init: initializing backend `pnm'
[dll] exiting
[dll] calling backend `umax's exit function
[dll] calling backend `qcam's exit function
[dll] calling backend `hp's exit function
[dll] calling backend `mustek's exit function
[dll] calling backend `pnm's exit function
-------------------------------------------------
-- ____________________________________________________________ / Evgeny Stambulchik <fnevgeny@plasma-gate.weizmann.ac.il> \ / Plasma Laboratory, Weizmann Institute of Science, Israel \ \ | Phone : (972)8-934-3610 == | == FAX : (972)8-934-3491 | | | URL : http://plasma-gate.weizmann.ac.il/~fnevgeny/ | | | Finger for PGP key >=====================================+ | |______________________________________________________________|
-- Source code, list archive, and docs: http://www.azstarnet.com/~axplinux/sane/ To unsubscribe: mail -s unsubscribe sane-devel-request@listserv.azstarnet.com