Trust Imagery 4800 SP +

From: Tim TimeWaster (tim@cuba.xs4all.nl)
Date: Tue Jul 17 2001 - 02:47:58 PDT

  • Next message: karsten.festag@t-online.de: "Re: How to write a backend?"

    Hi,

    After seeing the rather merciless mailing list policy in the FAQ (it may be
    a good idea to mention this in the man pages that pointed me to this list),
    I subscribed to ask the following question:

    yesterday I tried to get the Trust Imagery 4800 SP + (note the plus) working
    on FreeBSD with sane (backends 1.0.4). The predecessor of this scanner
    (4800 SP) is supported by the Mustek driver, but this driver did not recognize
    the scanner.

    Below is the debug output that sane-mustek(5) suggested to include.
    Any tips on how to quickly patch the driver so that I can use the scanner
    soon?

    Thanks,

    Tim

    -----------------------------------------------------------------------

    [sanei_debug] Setting debug level of mustek to 5.
    [mustek] SANE Mustek backend version 1.0 build 102 (SANE 1.0.4)
    [mustek] sane_init: authorize != null
    [mustek] sane_init: using sanei_scsi_open_extended
    [mustek] sane_init: reading config file `mustek.conf'
       :
    [mustek] attach: trying device /dev/pass4
    [mustek] dev_open /dev/pass4
    [mustek] dev_open: /dev/pass4 is a SCSI device
    [mustek] dev_open: wanted 8 kbytes, got 8 kbytes buffer
    [mustek] attach: sending INQUIRY
    [mustek] scsi_unit_wait_ready: sending TEST_UNIT_READY
    [mustek] scsi_unit_wait_ready: TEST_UNIT_READY finished
    [mustek] attach: SCSI Vendor: `Aashima ' Model: `IMAGERY 4800SP +' Rev.: `5.08'
    [mustek] attach: SCSI Type: Scanner; ANSI rev.: 2
    [mustek] attach: SCSI flags: Sync
    [mustek] attach: inquiry output:
    [mustek] 06 00 02 02 43 00 00 10 41 61 73 68 69 6d 61 20 ....C...Aashima
    [mustek] 49 4d 41 47 45 52 59 20 34 38 30 30 53 50 20 2b IMAGERY 4800SP +
    [mustek] 35 2e 30 38 35 2e 30 38 03 02 54 45 43 4f 20 56 5.085.08..TECO V
    [mustek] 4d 33 35 35 32 20 00 01 01 2c 00 01 04 b0 09 f6 M3552 ...,......
    [mustek] 10 68 01 2c 00 00 00 00 00 00 00 00 00 00 00 00 .h.,............
    [mustek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    [mustek] attach: device /dev/pass4 doesn't look like a Mustek scanner
        :
    [mustek] sane_init: end
    [mustek] sane_get_devices: 0 devices
    [mustek] sane_get_devices: end
    [mustek] sane_exit

    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    find-scanner tool (if appropriate). Please read the documentation which came
    with this software (README, FAQ, manpages). 

    -- 
Zen Microsystems: we're the om in .commmmmmmmm...

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Tue Jul 17 2001 - 02:31:29 PDT