Sorry,
I forgot to mention that I am using a Buslogic BT930 scsi card.
Ivan
On Fri, 6 Jul 2001, DStevenson wrote:
> As root, type,
> rmmod aic7xxx
> insmod aic7xxx_old
>
> The old driver works me, I was getting the same symptoms with that kernel and
> scanner. It might work for you.
>
> Dave
>
> On Friday 06 July 2001 00:17, you wrote:
> > Hello,
> >
> > I am running the 2.4.6 kernel and sane-backends 1.05. As with
> > sane-backends 1.04 I immediately get the following error when I type
> > "scanimage -d hp:/dev/scanner" as root:
> >
> > scanimage: open of device hp:/dev/scanner failed: Error during device I/O
> >
> > I get no sound from the scanner, no light, nothing other than the error
> > message on the screen. If I reboot with the 2.2.18 kernel everything
> > works fine. I am not sure
> > whether there is still a timeout issue as with 1.04, but I do see that
> > sanei_scsi.c has timeout commands everywhere. The line,
> > "req->sgdata.sg3.hdr.timeout = 1000 * 60 * 10;" is present in
> > sanei_scsi.c. Sane-find-scanner indicates the following:
> >
> > sane-find-scanner: found processor "HP C2520A 3644" at device /dev/scanner
> >
> > which seems to indicate a scanner (HP6100C) at /dev/scanner. I am really
> > getting frustrated at this point, but the problem must be with sane and
> > the 2.4 kernel. Does anybody have any ideas on what to try next?
> >
> > Thanks,
> >
> > Ivan Milos
> >
> >
> >
> > --
> > Source code, list archive, and docs: http://www.mostang.com/sane/
> > To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
>
> --
> Source code, list archive, and docs: http://www.mostang.com/sane/
> To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
>
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Fri Jul 06 2001 - 03:10:02 PDT