Here is the SCSI information:
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST34572W Rev: 0876
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: YAMAHA Model: CDR400t Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-8XCS Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 05 Lun: 00
Vendor: UMAX Model: SuperVista S-12 Rev: V1.9
Type: Scanner ANSI SCSI revision: 02
Yes, the sg module and the scsi adapter modules are available and loaded.
find-scanner returns this:
# Note that find-scanner will find any scanner that is connected
# to a SCSI bus. It will even find scanners that are not supported
# at all by SANE. It won't find a scanner that is connected to a
# parallel, USB or other non-SCSI port.
and nothing else.
The permissions of /dev/sg* are the following:
brw-rw-rw- 1 root disk 21, 0 may 10 21:22 sg0
brw-rw-rw- 1 root disk 21, 1 may 10 21:22 sg1
brw-rw-rw- 1 root disk 21, 2 may 10 21:22 sg2
brw-rw-rw- 1 root disk 21, 3 may 10 21:22 sg3
(They used to be 660, but they were changed to 666 for me to test the
scanner.)
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Mon Jun 04 2001 - 09:21:52 PDT