Yes, I did it. In my trials to make it work I also issue a: insmod scanner
vendor=0x04b8 product=0x010b
> Howard Gilbert wrote:
>
> > Hi Vittorio,
> >
> > I recently got an Epson 1240U working with Sane/Xsane after many
initial
> > problems. I don't know which kernel you are using. I used 2.4.2
> > The filescanner.c in the drivers directory needed to be modified. If you
go
> down
> > 'til you get to Epson you wiil see several lines with product and
vendor
> > codes BUT the 1240 is not there. Copy one of the existing lines and
then
> > substitute Vendor=0x04b8 Product=0x010b into it. It worked for me.
> > (If you're using kernel it 2.4.3 may be OK but I don't know).
> >
> > --
>
> A much easier solution is to include
>
> options scanner vender=0x04b8 product=0x010b
>
> in your modules.conf file. Did you try this? (It certainly works for me
in
> 2.2.18 land)
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Mon Apr 23 2001 - 23:45:49 PDT