Hi,
I have REAL problem getting my scanner to run under Linux Mandrak 7.2. I have loaded the sane 1.0.4 stuff from
the SANE site (the 1.0.3 package with Mandrake produces the results shown below)
Everything 'seems' to assemble correctly, but...
NB The scanner is connected to the first scsi card found 'atp870u' (correctly)
and I have two cards (the second one drives my SCSI disk and a CD Writer, which works fine - at last)...
The following is what may help...
Output from 'cdrecord -scanbus'...
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'Color ' 'FlatbedScanner_9' '0117' Scanner
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) *
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) 'YAMAHA ' 'CRW8824S ' '1.00' Removable CD-ROM
1,7,0 107) *
1,8,0 108) 'QUANTUM ' 'QM39100TD-SW ' 'N491' Disk
scsibus2:
2,0,0 200) 'RICOH ' 'CD-R/RW MP7060A ' '1.70' Removable CD-ROM
2,1,0 201) *
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) *
------------------------------------------------------------------------------------------
Result from 'cat /proc/scsi/scsi'...
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Color Model: FlatbedScanner_9 Rev: 0117
Type: Scanner ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: YAMAHA Model: CRW8824S Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 08 Lun: 00
Vendor: QUANTUM Model: QM39100TD-SW Rev: N491
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: RICOH Model: CD-R/RW MP7060A Rev: 1.70
Type: CD-ROM ANSI SCSI revision: 02
------------------------------------------------------------------------------------------
Result from running 'sane-backends-1.0.4/tools/find-scanner'...
# Note that find-scanner will find any scanner that is connected
# to a SCSI bus. It will even find scanners that are not supported
# at all by SANE. It won't find a scanner that is connected to a
# parallel, USB or other non-SCSI port.
find-scanner: found scanner "Color FlatbedScanner_9 0117" at device /dev/scanner
find-scanner: found scanner "Color FlatbedScanner_9 0117" at device /dev/sg0
find-scanner: found scanner "Color FlatbedScanner_9 0117" at device /dev/sga
-------------------------------------------------------------------------------------------
Now what?. I am told that this scanner (MaxiScan A4) can be driven by the AGFA Snapscan drivers (the remark
is 'probably a Vuego something or other).
Everything assembles OK. but when I attempt to get an image from the scanner (using scanimage) I get..
'Floating point error' and
every thing (not linux, but the scanner) hangs up, with the 'ready light' winking at me.
Can anybody help me please????
Regards
Ceri Hankey
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Wed Apr 04 2001 - 20:41:34 PDT