Hi all,
did anyone found problems when switching to 2.4 kernels?
I have a HP scanner on a sym53c860 scsi card:
scsi0 : sym53c8xx - version 1.6b
Vendor: HP Model: C5110A Rev: 3701
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sg0 at scsi0, channel 0, id 6, lun 0, type 3
When running, I get this error (both 2.2 and 2.4 kernels):
sym53c860-0-<6,*>: target did not report SYNC.
however, on 2.2 kernels xsane just continues scanning, but on 2.4 kernels
(tested 2.4.2) it is followed by this error (and xsane aborts):
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 6, lun
0 Read (6) 00 00 80 00 00
sym53c8xx_abort: pid=0 serial_number=965 serial_number_at_timeout=965
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 6, lun
0 Read (6) 00 00 80 00 00
sym53c8xx_abort: pid=0 serial_number=966 serial_number_at_timeout=966
sym53c860-0: restart (scsi reset).
Other scsi devices work without any problem (tested: CD reader and writer)
with kernel 2.4.2, only the scanner doesn't.
Does anyone have a good idea? What changed in 2.4?
thanks,
Olivier
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Wed Feb 28 2001 - 14:17:01 PST