Hi, Henning.
Henning Meier-Geinitz wrote:
> I don't know JetDirect. Is the scanner connected to the JetDirect
> server by a parport cable and the server by ethernet to the computer?
> In this case use Parport (ECP) and add something like "JetDirect
> servers also supported" to :comment.
>
> If there is a network port on the scanner itsself
> :interface "Parport (ECP), Ethernet" (or JetDirect instead of
> Ethernet) would be ok.
For currently supported MFPs and JetDirects, the peripheral is connected to
a parallel port on an external JetDirect print server, which is connected to
a LAN via ethernet or token ring. There are also internal card versions of
JetDirects which plug into a special slot on a variety of HP printers,
especially high-end laser printers.
How does this sound, to keep it relatively generic?
:model "HP OfficeJet Pro 1150C"
:interface "Parport(ECP) JetDirect"
:url "http://hpoj.sourceforge.net"
:model "HP OfficeJet Pro 1170C/1175C"
:interface "Parport(ECP) JetDirect"
:url "http://hpoj.sourceforge.net"
:model "HP OfficeJet R series/PSC500"
:interface "Parport(ECP) JetDirect"
:url "http://hpoj.sourceforge.net"
:model "HP OfficeJet G series"
:interface "Parport(ECP) JetDirect"
:url "http://hpoj.sourceforge.net"
:model "HP OfficeJet K series"
:interface "Parport(ECP) JetDirect"
:url "http://hpoj.sourceforge.net"
:comment "partial support -- requires extra steps to scan successfully"
Is it appropriate to put the URL after each model? Running sane-desc.el
on this seems to produce reasonable output, where each OfficeJet model can
be clicked through to the OfficeJet Linux driver project page.
David
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Sat Nov 25 2000 - 04:08:29 PST