I have been unsuccessful at getting this scanner to work. My current
system:
Software:
RedHat 6.0
Linux Kernel 2.2.5-15
sane 1.0.3
Hardware:
ncr 53c875 scsi card --
[root@k2 sane-1.0.3]# cat /proc/scsi/ncr53c8xx/0
General information:
Chip NCR53C875, device id 0xf, revision id 0x3
IO port address 0xd800, IRQ number 12
Using memory mapped IO at virtual address 0xc400e000
Synchronous period factor 12, max commands per lun 32
Profiling information:
num_trans = 574
num_kbytes = 7
num_disc = 0
num_break = 24
num_int = 563
num_fly = 574
ms_setup = 50
ms_data = 210
ms_disc = 0
ms_post = 30
Epson ES-300C (GT6000) Scanner using SCSI connection:
[root@k2 sane-1.0.3]# ./tools/find-scanner
find-scanner: found processor "EPSON SC ANNER GT-6000 2.01" at
device /dev/scanner
Dip Switches:
Block 1: on,on,on,on,off,off,off,off
Block 2: on,off,off,off,off,on,on,off
When I run scanimage or xscanimage I get the following error:
[epson] ident failed
and the program hangs (doesn't crash or dump core). The "Ready" light on
the scanner goes of and "E-1" is displayed in the scanner LCD (Interface
Error).
[root@k2 sane-1.0.3]# xscanimage 2>&1 | tee log
[sanei_debug] Setting debug level of epson to 5.
[epson] sane_init: sane 1.0.3
[epson] sane_init, >scsi EPSON<
[epson] sane_init, >scsi EPSON<
[epson] SANE Epson Backend v0.1.33 - 2000-07-29
[epson] attach(/dev/sgb)
[epson] attach: opening /dev/sgb
[epson] attach: sending INQUIRY
[epson] >EPSON SCANNER GT-6000 2.01<
[epson] send buf, size = 2
[epson] get_identity_information()
[epson] send buf, size = 2
[epson] ident failed
[epson] sane_init, >/dev/scanner<
[epson] sane_init, >/dev/scanner<
[epson] SANE Epson Backend v0.1.33 - 2000-07-29
[epson] attach(/dev/scanner)
[epson] attach: opening /dev/scanner
Any feedback would be appreciated. The only other thing on the scsi bus is
an internal scsi zip drive.
-Alan
--------------------------------------------------------------------
Alan Williams Where observation is concerned,
Alan@MolBio.org chance favors the prepared mind.
http://www.MolBio.org/ -- Louis Pasteur
--------------------------------------------------------------------
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Sun Oct 29 2000 - 14:35:25 PST