Re: scanimage: open of device sharp-s:/dev/sg0 failed: Invalid argument

From: abel deuring (a.deuring@satzbau-gmbh.de)
Date: Sat Oct 21 2000 - 06:22:17 PDT

  • Next message: abel deuring: "Re: Problems with Acer ScanPrisa 640S"

    Isaac Wilcox wrote:
    >
    > Hi,
    >
    > I'm having problems getting my Sharp JX-320 working with SANE under
    > Linux. I had a read of README, README.linux, PROBLEMS, FAQ, sane-sharp(5)
    > but I still can't see what's wrong.
    > If anybody could help, I'd be very grateful.
    >
    > Plugged everything in, switched everything on.
    > ./configured, maked, make installed...
    > Issued following commands (as root)...
    >
    > # cat /proc/scsi/scsi
    > Attached devices:
    > Host: scsi0 Channel: 00 Id: 01 Lun: 00
    > Vendor: SHARP Model: JX320 SCSI Rev: 071L
    > Type: Scanner ANSI SCSI revision: 02
    > Host: scsi0 Channel: 00 Id: 03 Lun: 00
    > Vendor: YAMAHA Model: CRW8824S Rev: 1.00
    > Type: CD-ROM ANSI SCSI revision: 02
    >
    > # ls -la /dev/scanner
    > lrwxrwxrwx 1 root root 3 Oct 20 18:00 /dev/scanner -> sg0
    >
    > # ls -la /dev/sga
    > lrwxrwxrwx 1 root root 3 Aug 20 17:01 /dev/sga -> sg0
    >
    > # ls -la /dev/sg0
    > crw-rw---- 1 root scanner 21, 0 Mar 24 2000 /dev/sg0
    >
    > # find-scanner
    > find-scanner: found scanner "SHARP JX320 SCSI 071L" at device /dev/scanner
    > find-scanner: found scanner "SHARP JX320 SCSI 071L" at device /dev/sg0
    > find-scanner: found scanner "SHARP JX320 SCSI 071L" at device /dev/sga
    >
    > # scanimage -L
    [nothing happens...]

    Isaac,

    could you please send me the output of the command:

            SANE_DEBUG_SHARP=128 SANE_DEBUG_SANEI_SCSI=128 SANE_DEBUG_DLL=128
    scanimage -L

    Abel 

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Sat Oct 21 2000 - 06:06:06 PDT