Re: io error on xsane

From: bob van der Poel (bvdpoel@uniserve.com)
Date: Thu Sep 28 2000 - 19:33:41 PDT

Next message: Oliver Rauch: "Re: Problems w/Sane Preferences Resolved"

Previous message: ken fisher: "Problems w/Sane Preferences Resolved"
In reply to: Oliver Rauch: "Re: io error on xsane"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Oliver Rauch wrote:
>
> bob van der Poel wrote:
> >
> > Oliver Rauch wrote:
> > >
> > > bob van der Poel wrote:
> > > >
> > > > Oliver Rauch wrote:
> > > > >
> > > > > bob van der Poel wrote:
> > > > > >
> > > > > > Okay, I now have both my ide-scsi cdrom and the scanner working. It will
> > > > > > not work from boot, I have to manually do a modprobe for both the
> > > > > > ide-scsi and lha152x.... I ended up copying my old conf.modules file to
> > > > > > do this...and I'm sure there's a conflict somewhere. Any ideas
> > > > > > appreaicated.
> > > > > >
> > > > > > But, big problem now is that sane doesn't work. It's not my scanner,
> > > > > > etc: scanimage and xscanimage both work fine. However, xsane comes up,
> > > > > > but when I try to scan (or get a preview) I get a popup saying "i/o
> > > > > > error". Any ideas on this????
> > > > > >
> > > > > > Oh, this is using sane 1.0.3 and xsane .61
> > > > > >
> > > > > >
> > > > >
> > > > > Hi Bob,
> > > > >
> > > > > it looks like the ide via scsi driver makes problems - I already
> > > > > heard of these problems.
> > > > > The problems will not only occur with xsane but it is possible
> > > > > that they occur more often than with xscanimage.
> > > > >
> > > > >
> > > >
> > > > Okay, I disabled all the idi-scsi stuff. There was an append statement
> > > > in my lilo.conf, the fstab file had an automount line, and the
> > > > conf.modules had the ide-scsi stuff as well. I'm pretty convinced that
> > > > there are no idi-scsi modules in memory. This makes absolutely NO change
> > > > to xsane. Same error message "Failed to start scanner...". Still,
> > > > xscanimage works fine.
> > > >
> > > > So, what else can I check?
> > > >
> > >
> > > Do
> > > export SANE_DEBUG_DLL=128
> > > export SANE_DEBUG_UMAX=12
> > > export SANE_DEBUG_SANEI_SCSI=128
> > > xsane 2>debug.txt
> > > and start the scan, then exit xsane
>
> > [sanei_init_debug]: Setting debug level of dll to 128.
> > [dll] adding backend microtek
> > [dll] loading backend microtek
> > [dll] dlopen()ing `/usr/lib/sane/libsane-microtek.so.1'
>
> Ok, for the microtek backend you should use
> export SANE_DEBUG_MICROTEK=128
> instead of SANE_DEBUG_UMAX.
>

Actaully, the UMAX define looked funny to me as well..should have caught
it myself. Anyway, here's the right one:

-- 
   __
  /  )      /         Bob van der Poel
 /--<  ____/__        bvdpoel@uniserve.com
/___/_(_) /_)         http://users.uniserve.com/~bvdpoel

[sanei_init_debug]: Setting debug level of dll to 128. [dll] adding backend microtek [dll] loading backend microtek [dll] dlopen()ing `/usr/lib/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [sanei_init_debug]: Setting debug level of microtek to 128. [microtek] sane_init: MICROTEK says hello! (v0.12.0) [microtek] sane_init: config- # Uncomment following line to disable "real calibration" routines... [microtek] sane_init: config- #norealcal [microtek] sane_init: config- # Uncomment following line to disable "clever precalibration" routines... [microtek] sane_init: config- #noprecal [microtek] sane_init: config- # Using "norealcal" will revert backend to pre-0.11.0 calibration code. [microtek] sane_init: config- scsi * * Scanner [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] searched device is /dev/sga [microtek] attach_scanner: /dev/sga [microtek] attach_scanner: opening /dev/sga [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20136 [sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [microtek] attach_scanner: sending INQUIRY [sanei_scsi] scsi_req_enter: entered 0x40398008 [sanei_scsi] sanei_scsi.issue: 0x40398008 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x40398008 [sanei_scsi] sanei_scsi.issue: 0x40398008 [sanei_scsi] sanei_scsi_req_wait: read 132 bytes [microtek] id_microtek... [microtek] parse_inquiry... [microtek] dump_inquiry... === SANE/Microtek backend v0.12.0 === ========== Scanner Inquiry Block ========mm 06 31 14 01 5b 00 00 00 20 20 20 20 20 20 20 20 53 63 61 6e 6e 65 72 20 20 20 20 20 20 20 20 20 31 2e 38 30 53 43 53 49 20 46 2f 57 56 33 2e 34 20 43 54 4c 35 33 38 30 03 4f 8c c5 02 ee 5f 03 01 03 01 00 00 83 00 01 0e 0e 01 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff

========== Scanner Inquiry Report ========== ===== Scanner ID... Device Type Code: 0x06 Model Code: 0x5f Vendor Name: ' ' Model Name: 'Scanner ' Vendor Specific String: 'SCSI F/WV3.4 CTL5380' Firmware Rev: '1.80' SCSI F/W version: 3.1 Scanner F/W version: 1.4 Response data format: 0x01 ===== Imaging Capabilities... Modes: Lineart Halftone Gray Color (OnePass) Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes Supported Bits Per Sample: 4 8 Max. document size code: 0x02 Max. document size: 2549 x 3505 pixels Frame units: pixels 1/8"'s # of built-in halftones: 12 Downloadable patterns? Yes Data Compression: Contrast Settings: 14 Exposure Settings: 14 Adjustable Shadow/Highlight? yes Adjustable Midtone? yes Digital brightness/offset? yes Gamma Table Size: 256 entries of 1 bytes (max. depth: 8) ===== Source Options... Feed type: flatbed ADF support? yes Document Feeder Support? yes Feeder Backtracking? yes Feeder Installed? no Feeder Ready? no Transparency Adapter Installed? no Fast Color Prescan? no Selectable Transfer Format? no Color Transfer Sequence: line-by-line, non-sequential with headers Three pass scan support? no ModeSelect-1 and ModeSense-1 Support? yes Can Disable Linearization Table? no Can Disable Start-of-Scan Recalibration? yes Internal expanded expansion? no

[microtek] attach_scanner: happy. [sanei_scsi] searched device is /dev/sga [microtek] attach_scanner: /dev/sga [microtek] sane_init: config- /dev/scanner [microtek] attach_scanner: /dev/scanner [microtek] attach_scanner: opening /dev/scanner [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory[microtek] attach_scanner: open failed [microtek] sane_get_devices [microtek] sane_open [microtek] sane_open: find device... [microtek] sane_open: create scanner... [microtek] sane_open: initialize scanner dependent stuff... [microtek] sane_open: Real calibration enabled. [microtek] sane_open: init gamma tables... [microtek] sane_open: init pass-time variables... [microtek] sane_open: init clever cache... [microtek] sane_open: initialize options: [microtek] init_options... [microtek] init_options: quant yes [microtek] init_options: done. [dll] control_option(handle=0x80e4038,option=0,action=0,value=0x80ade24,info=(nil)) [microtek] sane_control_option (opt=0,act=0,val=0x80ade24,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=1) [microtek] sane_get_option_descriptor (1)... [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] control_option(handle=0x80e4038,option=2,action=0,value=0x8114620,info=(nil)) [microtek] sane_control_option (opt=2,act=0,val=0x8114620,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=3) [microtek] sane_get_option_descriptor (3)... [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=4,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=5) [microtek] sane_get_option_descriptor (5)... [dll] control_option(handle=0x80e4038,option=5,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=5,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=6) [microtek] sane_get_option_descriptor (6)... [dll] get_option_descriptor(handle=0x80e4038,option=7) [microtek] sane_get_option_descriptor (7)... [dll] control_option(handle=0x80e4038,option=7,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=7,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=8) [microtek] sane_get_option_descriptor (8)... [dll] get_option_descriptor(handle=0x80e4038,option=9) [microtek] sane_get_option_descriptor (9)... [dll] get_option_descriptor(handle=0x80e4038,option=10) [microtek] sane_get_option_descriptor (10)... [dll] control_option(handle=0x80e4038,option=10,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=10,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=11) [microtek] sane_get_option_descriptor (11)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=16) [microtek] sane_get_option_descriptor (16)... [dll] get_option_descriptor(handle=0x80e4038,option=17) [microtek] sane_get_option_descriptor (17)... [dll] control_option(handle=0x80e4038,option=17,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=17,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=18) [microtek] sane_get_option_descriptor (18)... [dll] control_option(handle=0x80e4038,option=18,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=18,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=19) [microtek] sane_get_option_descriptor (19)... [dll] control_option(handle=0x80e4038,option=19,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=19,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=20) [microtek] sane_get_option_descriptor (20)... [dll] control_option(handle=0x80e4038,option=20,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=20,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=21) [microtek] sane_get_option_descriptor (21)... [dll] control_option(handle=0x80e4038,option=21,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=21,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=22) [microtek] sane_get_option_descriptor (22)... [dll] control_option(handle=0x80e4038,option=22,action=0,value=0xbffff300,info=(nil)) [microtek] sane_control_option (opt=22,act=0,val=0xbffff300,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=23) [microtek] sane_get_option_descriptor (23)... [dll] get_option_descriptor(handle=0x80e4038,option=24) [microtek] sane_get_option_descriptor (24)... [dll] control_option(handle=0x80e4038,option=24,action=0,value=0x81185d8,info=(nil)) [microtek] sane_control_option (opt=24,act=0,val=0x81185d8,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=25) [microtek] sane_get_option_descriptor (25)... [dll] get_option_descriptor(handle=0x80e4038,option=26) [microtek] sane_get_option_descriptor (26)... [dll] get_option_descriptor(handle=0x80e4038,option=27) [microtek] sane_get_option_descriptor (27)... [dll] get_option_descriptor(handle=0x80e4038,option=28) [microtek] sane_get_option_descriptor (28)... [dll] get_option_descriptor(handle=0x80e4038,option=29) [microtek] sane_get_option_descriptor (29)... [dll] get_option_descriptor(handle=0x80e4038,option=30) [microtek] sane_get_option_descriptor (30)... [dll] get_option_descriptor(handle=0x80e4038,option=31) [microtek] sane_get_option_descriptor (31)... [dll] get_option_descriptor(handle=0x80e4038,option=32) [microtek] sane_get_option_descriptor (32)... [dll] get_option_descriptor(handle=0x80e4038,option=33) [microtek] sane_get_option_descriptor (33)... [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] control_option(handle=0x80e4038,option=2,action=0,value=0x8119ee8,info=(nil)) [microtek] sane_control_option (opt=2,act=0,val=0x8119ee8,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=0,value=0xbffff08c,info=(nil)) [microtek] sane_control_option (opt=4,act=0,val=0xbffff08c,info=(nil)) [dll] get_parameters(handle=0x80e4038,params=0x80adec0) [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 33 (21) [microtek] sane_get_parameters: dots_per_mm: 3.937008 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 850 [microtek] sane_get_parameters: lines: 1168 ppl: 850 bpl: 2550 [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbffff1b8,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbffff1b8,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbfffe220,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffe220,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbfffe220,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbfffe220,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbfffe220,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbfffe220,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbfffe220,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbfffe220,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] get_option_descriptor(handle=0x80e4038,option=24) [microtek] sane_get_option_descriptor (24)... [dll] get_option_descriptor(handle=0x80e4038,option=1) [microtek] sane_get_option_descriptor (1)... [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] control_option(handle=0x80e4038,option=2,action=0,value=0x8119558,info=(nil)) [microtek] sane_control_option (opt=2,act=0,val=0x8119558,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=3) [microtek] sane_get_option_descriptor (3)... [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=4,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=5) [microtek] sane_get_option_descriptor (5)... [dll] control_option(handle=0x80e4038,option=5,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=5,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=6) [microtek] sane_get_option_descriptor (6)... [dll] get_option_descriptor(handle=0x80e4038,option=7) [microtek] sane_get_option_descriptor (7)... [dll] control_option(handle=0x80e4038,option=7,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=7,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=8) [microtek] sane_get_option_descriptor (8)... [dll] get_option_descriptor(handle=0x80e4038,option=9) [microtek] sane_get_option_descriptor (9)... [dll] get_option_descriptor(handle=0x80e4038,option=10) [microtek] sane_get_option_descriptor (10)... [dll] control_option(handle=0x80e4038,option=10,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=10,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=11) [microtek] sane_get_option_descriptor (11)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=16) [microtek] sane_get_option_descriptor (16)... [dll] get_option_descriptor(handle=0x80e4038,option=17) [microtek] sane_get_option_descriptor (17)... [dll] control_option(handle=0x80e4038,option=17,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=17,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=18) [microtek] sane_get_option_descriptor (18)... [dll] control_option(handle=0x80e4038,option=18,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=18,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=19) [microtek] sane_get_option_descriptor (19)... [dll] control_option(handle=0x80e4038,option=19,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=19,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=20) [microtek] sane_get_option_descriptor (20)... [dll] control_option(handle=0x80e4038,option=20,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=20,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=21) [microtek] sane_get_option_descriptor (21)... [dll] control_option(handle=0x80e4038,option=21,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=21,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=22) [microtek] sane_get_option_descriptor (22)... [dll] control_option(handle=0x80e4038,option=22,action=0,value=0xbfffdfc0,info=(nil)) [microtek] sane_control_option (opt=22,act=0,val=0xbfffdfc0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=23) [microtek] sane_get_option_descriptor (23)... [dll] get_option_descriptor(handle=0x80e4038,option=24) [microtek] sane_get_option_descriptor (24)... [dll] control_option(handle=0x80e4038,option=24,action=0,value=0x81196d8,info=(nil)) [microtek] sane_control_option (opt=24,act=0,val=0x81196d8,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=25) [microtek] sane_get_option_descriptor (25)... [dll] get_option_descriptor(handle=0x80e4038,option=26) [microtek] sane_get_option_descriptor (26)... [dll] get_option_descriptor(handle=0x80e4038,option=27) [microtek] sane_get_option_descriptor (27)... [dll] get_option_descriptor(handle=0x80e4038,option=28) [microtek] sane_get_option_descriptor (28)... [dll] get_option_descriptor(handle=0x80e4038,option=29) [microtek] sane_get_option_descriptor (29)... [dll] get_option_descriptor(handle=0x80e4038,option=30) [microtek] sane_get_option_descriptor (30)... [dll] get_option_descriptor(handle=0x80e4038,option=31) [microtek] sane_get_option_descriptor (31)... [dll] get_option_descriptor(handle=0x80e4038,option=32) [microtek] sane_get_option_descriptor (32)... [dll] get_option_descriptor(handle=0x80e4038,option=33) [microtek] sane_get_option_descriptor (33)... [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] control_option(handle=0x80e4038,option=2,action=0,value=0x8118628,info=(nil)) [microtek] sane_control_option (opt=2,act=0,val=0x8118628,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=0,value=0xbfffdd4c,info=(nil)) [microtek] sane_control_option (opt=4,act=0,val=0xbfffdd4c,info=(nil)) [dll] get_parameters(handle=0x80e4038,params=0x80adec0) [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 33 (21) [microtek] sane_get_parameters: dots_per_mm: 3.937008 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 850 [microtek] sane_get_parameters: lines: 1168 ppl: 850 bpl: 2550 [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbfffde78,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffde78,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbfffe050,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffe050,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbfffe050,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbfffe050,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbfffe050,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbfffe050,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbfffe050,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbfffe050,info=(nil)) [dll] get_parameters(handle=0x80e4038,params=0x80adec0) [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 33 (21) [microtek] sane_get_parameters: dots_per_mm: 3.937008 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 850 [microtek] sane_get_parameters: lines: 1168 ppl: 850 bpl: 2550 [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbffff370,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbffff370,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbffff370,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbffff370,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbffff370,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbffff370,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbffff370,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbffff370,info=(nil)) [dll] get_parameters(handle=0x80e4038,params=0x80adec0) [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 33 (21) [microtek] sane_get_parameters: dots_per_mm: 3.937008 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 850 [microtek] sane_get_parameters: lines: 1168 ppl: 850 bpl: 2550 [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=1,value=0xbffff4d0,info=(nil)) [microtek] sane_control_option (opt=4,act=1,val=0xbffff4d0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] get_option_descriptor(handle=0x80e4038,option=24) [microtek] sane_get_option_descriptor (24)... [dll] get_option_descriptor(handle=0x80e4038,option=1) [microtek] sane_get_option_descriptor (1)... [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] control_option(handle=0x80e4038,option=2,action=0,value=0x811b1b8,info=(nil)) [microtek] sane_control_option (opt=2,act=0,val=0x811b1b8,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=3) [microtek] sane_get_option_descriptor (3)... [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=4,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=5) [microtek] sane_get_option_descriptor (5)... [dll] control_option(handle=0x80e4038,option=5,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=5,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=6) [microtek] sane_get_option_descriptor (6)... [dll] get_option_descriptor(handle=0x80e4038,option=7) [microtek] sane_get_option_descriptor (7)... [dll] control_option(handle=0x80e4038,option=7,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=7,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=8) [microtek] sane_get_option_descriptor (8)... [dll] get_option_descriptor(handle=0x80e4038,option=9) [microtek] sane_get_option_descriptor (9)... [dll] get_option_descriptor(handle=0x80e4038,option=10) [microtek] sane_get_option_descriptor (10)... [dll] control_option(handle=0x80e4038,option=10,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=10,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=11) [microtek] sane_get_option_descriptor (11)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=16) [microtek] sane_get_option_descriptor (16)... [dll] get_option_descriptor(handle=0x80e4038,option=17) [microtek] sane_get_option_descriptor (17)... [dll] control_option(handle=0x80e4038,option=17,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=17,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=18) [microtek] sane_get_option_descriptor (18)... [dll] control_option(handle=0x80e4038,option=18,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=18,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=19) [microtek] sane_get_option_descriptor (19)... [dll] control_option(handle=0x80e4038,option=19,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=19,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=20) [microtek] sane_get_option_descriptor (20)... [dll] control_option(handle=0x80e4038,option=20,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=20,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=21) [microtek] sane_get_option_descriptor (21)... [dll] control_option(handle=0x80e4038,option=21,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=21,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=22) [microtek] sane_get_option_descriptor (22)... [dll] control_option(handle=0x80e4038,option=22,action=0,value=0xbffff2c0,info=(nil)) [microtek] sane_control_option (opt=22,act=0,val=0xbffff2c0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=23) [microtek] sane_get_option_descriptor (23)... [dll] get_option_descriptor(handle=0x80e4038,option=24) [microtek] sane_get_option_descriptor (24)... [dll] control_option(handle=0x80e4038,option=24,action=0,value=0x81180c8,info=(nil)) [microtek] sane_control_option (opt=24,act=0,val=0x81180c8,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=25) [microtek] sane_get_option_descriptor (25)... [dll] get_option_descriptor(handle=0x80e4038,option=26) [microtek] sane_get_option_descriptor (26)... [dll] get_option_descriptor(handle=0x80e4038,option=27) [microtek] sane_get_option_descriptor (27)... [dll] get_option_descriptor(handle=0x80e4038,option=28) [microtek] sane_get_option_descriptor (28)... [dll] get_option_descriptor(handle=0x80e4038,option=29) [microtek] sane_get_option_descriptor (29)... [dll] get_option_descriptor(handle=0x80e4038,option=30) [microtek] sane_get_option_descriptor (30)... [dll] get_option_descriptor(handle=0x80e4038,option=31) [microtek] sane_get_option_descriptor (31)... [dll] get_option_descriptor(handle=0x80e4038,option=32) [microtek] sane_get_option_descriptor (32)... [dll] get_option_descriptor(handle=0x80e4038,option=33) [microtek] sane_get_option_descriptor (33)... [dll] get_option_descriptor(handle=0x80e4038,option=2) [microtek] sane_get_option_descriptor (2)... [dll] control_option(handle=0x80e4038,option=2,action=0,value=0x8119d60,info=(nil)) [microtek] sane_control_option (opt=2,act=0,val=0x8119d60,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=0,value=0xbffff04c,info=(nil)) [microtek] sane_control_option (opt=4,act=0,val=0xbffff04c,info=(nil)) [dll] get_parameters(handle=0x80e4038,params=0x80adec0) [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 33 (21) [microtek] sane_get_parameters: dots_per_mm: 3.897638 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 840 [microtek] sane_get_parameters: lines: 1156 ppl: 840 bpl: 2520 [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbffff178,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbffff178,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbffff350,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbffff350,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbffff350,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbffff350,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbffff350,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbffff350,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbffff350,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbffff350,info=(nil)) [dll] get_parameters(handle=0x80e4038,params=0x80adec0) [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 33 (21) [microtek] sane_get_parameters: dots_per_mm: 3.897638 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 840 [microtek] sane_get_parameters: lines: 1156 ppl: 840 bpl: 2520 [dll] control_option(handle=0x80e4038,option=4,action=0,value=0x811dabc,info=(nil)) [microtek] sane_control_option (opt=4,act=0,val=0x811dabc,info=(nil)) [dll] control_option(handle=0x80e4038,option=2,action=0,value=0x811dafc,info=(nil)) [microtek] sane_control_option (opt=2,act=0,val=0x811dafc,info=(nil)) [dll] control_option(handle=0x80e4038,option=12,action=0,value=0x811dad8,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0x811dad8,info=(nil)) [dll] control_option(handle=0x80e4038,option=13,action=0,value=0x811dadc,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0x811dadc,info=(nil)) [dll] control_option(handle=0x80e4038,option=14,action=0,value=0x811dae0,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0x811dae0,info=(nil)) [dll] control_option(handle=0x80e4038,option=15,action=0,value=0x811dae4,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0x811dae4,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] get_option_descriptor(handle=0x80e4038,option=4) [microtek] sane_get_option_descriptor (4)... [dll] control_option(handle=0x80e4038,option=4,action=1,value=0xbfffeab0,info=(nil)) [microtek] sane_control_option (opt=4,act=1,val=0xbfffeab0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=1,value=0xbfffeaa0,info=(nil)) [microtek] sane_control_option (opt=12,act=1,val=0xbfffeaa0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=1,value=0xbfffeaa0,info=(nil)) [microtek] sane_control_option (opt=13,act=1,val=0xbfffeaa0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=1,value=0xbfffeaa0,info=(nil)) [microtek] sane_control_option (opt=14,act=1,val=0xbfffeaa0,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=1,value=0xbfffeaa0,info=(nil)) [microtek] sane_control_option (opt=15,act=1,val=0xbfffeaa0,info=(nil)) [dll] control_option(handle=0x80e4038,option=9,action=1,value=0xbfffeacc,info=(nil)) [microtek] sane_control_option (opt=9,act=1,val=0xbfffeacc,info=(nil)) [dll] start(handle=0x80e4038) [microtek] sane_start... [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 17 (11) [microtek] sane_get_parameters: dots_per_mm: 2.007874 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 432 [microtek] sane_get_parameters: lines: 596 ppl: 432 bpl: 1296 [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: SG driver version: 20136 [sanei_scsi] sanei_scsi_open_extended: using 131072 bytes as SCSI buffer [sanei_scsi] trying to enable low level command queueing [sanei_scsi] sanei_scsi_open: Host adapter queue depth: 1 [sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time [microtek] .wait_ready 7... [sanei_scsi] scsi_req_enter: entered 0x40568008 [sanei_scsi] sanei_scsi.issue: 0x40568008 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x40568008 [sanei_scsi] sanei_scsi.issue: 0x40568008 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [microtek] finagle_precal... [microtek] .compare_mode_sense 7... [sanei_scsi] scsi_req_enter: entered 0x40568008 [sanei_scsi] sanei_scsi.issue: 0x40568008 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x40568008 [sanei_scsi] sanei_scsi.issue: 0x40568008 [sanei_scsi] sanei_scsi_req_wait: read 55 bytes [microtek] finagle_precal: must precalibrate! [microtek] do_real_calibrate... [microtek] .start_calibrate... [sanei_scsi] scsi_req_enter: entered 0x40568008 [sanei_scsi] sanei_scsi.issue: 0x40568008 [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 1 [sanei_scsi] sanei_scsi_req_wait: waiting for 0x40568008 [sanei_scsi] sanei_scsi.issue: 0x40568008 [sanei_scsi] sanei_scsi_req_wait: read 36 bytes [sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success [microtek] SENSE! fd = 7 [microtek] sense = 81 01 00 00. [microtek] sense: ERR_SCSICMD [microtek] end_scan... [dll] cancel(handle=0x80e4038) [microtek] sane_cancel... [microtek] end_scan... [dll] control_option(handle=0x80e4038,option=4,action=1,value=0x811dabc,info=(nil)) [microtek] sane_control_option (opt=4,act=1,val=0x811dabc,info=(nil)) [dll] control_option(handle=0x80e4038,option=12,action=1,value=0x811dad8,info=(nil)) [microtek] sane_control_option (opt=12,act=1,val=0x811dad8,info=(nil)) [dll] control_option(handle=0x80e4038,option=13,action=1,value=0x811dadc,info=(nil)) [microtek] sane_control_option (opt=13,act=1,val=0x811dadc,info=(nil)) [dll] control_option(handle=0x80e4038,option=14,action=1,value=0x811dae0,info=(nil)) [microtek] sane_control_option (opt=14,act=1,val=0x811dae0,info=(nil)) [dll] control_option(handle=0x80e4038,option=15,action=1,value=0x811dae4,info=(nil)) [microtek] sane_control_option (opt=15,act=1,val=0x811dae4,info=(nil)) [dll] control_option(handle=0x80e4038,option=2,action=1,value=0x811dafc,info=(nil)) [microtek] sane_control_option (opt=2,act=1,val=0x811dafc,info=(nil)) [dll] control_option(handle=0x80e4038,option=9,action=1,value=0xbfffe92c,info=(nil)) [microtek] sane_control_option (opt=9,act=1,val=0xbfffe92c,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbfffe880,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffe880,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbfffe880,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbfffe880,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbfffe880,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbfffe880,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbfffe880,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbfffe880,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbfffe900,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffe900,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbfffe900,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbfffe900,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbfffe900,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbfffe900,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbfffe900,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbfffe900,info=(nil)) [dll] cancel(handle=0x80e4038) [microtek] sane_cancel... [microtek] end_scan... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] get_option_descriptor(handle=0x80e4038,option=12) [microtek] sane_get_option_descriptor (12)... [dll] control_option(handle=0x80e4038,option=12,action=0,value=0xbfffea50,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffea50,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=13) [microtek] sane_get_option_descriptor (13)... [dll] control_option(handle=0x80e4038,option=13,action=0,value=0xbfffea50,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbfffea50,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=14) [microtek] sane_get_option_descriptor (14)... [dll] control_option(handle=0x80e4038,option=14,action=0,value=0xbfffea50,info=(nil)) [microtek] sane_control_option (opt=14,act=0,val=0xbfffea50,info=(nil)) [dll] get_option_descriptor(handle=0x80e4038,option=15) [microtek] sane_get_option_descriptor (15)... [dll] control_option(handle=0x80e4038,option=15,action=0,value=0xbfffea50,info=(nil)) [microtek] sane_control_option (opt=15,act=0,val=0xbfffea50,info=(nil)) [dll] get_parameters(handle=0x80e4038,params=0x80adec0) [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 33 (21) [microtek] sane_get_parameters: dots_per_mm: 3.897638 [microtek] sane_get_parameters: units_per_mm: 11.811024 [microtek] WIDTHPIX: before exp: 840 [microtek] sane_get_parameters: lines: 1156 ppl: 840 bpl: 2520 [dll] close(handle=0x80e4038) [microtek] sane_close... [dll] exiting [dll] calling backend `microtek's exit function [microtek] sane_exit... [microtek] sane_exit: MICROTEK says goodbye.

--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

Next message: Oliver Rauch: "Re: Problems w/Sane Preferences Resolved"
Previous message: ken fisher: "Problems w/Sane Preferences Resolved"
In reply to: Oliver Rauch: "Re: io error on xsane"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Fri Sep 29 2000 - 09:50:52 PDT