SANE with ScanMagic 9636S

From: Ivo (death@metalfield.com)
Date: Mon Sep 18 2000 - 02:01:45 PDT

Next message: Hans Herdegen: "SANE with ACER ScanPrisa 640S"

Previous message: Petter Reinholdtsen: "Future-proofing SANE."
Next in thread: Hans Herdegen: "SANE with ACER ScanPrisa 640S"
Reply: Hans Herdegen: "SANE with ACER ScanPrisa 640S"
Reply: Henning Meier-Geinitz: "Re: SANE with ScanMagic 9636S"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Allright again! I've kinda fixed that speed problem as well. By uncommenting
#define USLEEP in linux/drivers/scsi/g_NCR5380.c the system is completely
unusable while scanning, but at least scanning speed is normal.

Strange enough, I don't think scanning took hold of the entire system while
scanning under Windows (with the driver shipped with the scanner). Perhaps the
SCSI adapter does support interrupts, but I need to "jumper the board for a
free IRQ"?

scsi1 : IRQ0 not free, interrupts disabled
scsi1 : interrupts not enabled. for better interactive performance,
scsi1 : please jumper the board for a free IRQ.

Ivo

--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

Next message: Hans Herdegen: "SANE with ACER ScanPrisa 640S"
Previous message: Petter Reinholdtsen: "Future-proofing SANE."
Next in thread: Hans Herdegen: "SANE with ACER ScanPrisa 640S"
Reply: Hans Herdegen: "SANE with ACER ScanPrisa 640S"
Reply: Henning Meier-Geinitz: "Re: SANE with ScanMagic 9636S"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Mon Sep 18 2000 - 01:56:08 PDT