Re: Possible sane problem with version 1.0.2 or system

From: Oliver Rauch (oliver.rauch@Wolfsburg.DE)
Date: Tue Jul 18 2000 - 09:42:53 PDT

  • Next message: Oliver Rauch: "Re: advice about concurrent Linux/NT development?"

    "Ralph F. De Witt" wrote:

    > [root@Kitty /root]# cat /proc/scsi/aic7xxx/0
    > Adaptec AIC7xxx driver version: 5.1.31/3.2.4
    > Compile Options:
    > TCQ Enabled By Default : Disabled
    > AIC7XXX_PROC_STATS : Enabled
    > AIC7XXX_RESET_DELAY : 5
    >
    > Adapter Configuration:
    > SCSI Adapter: Adaptec AIC-7850 SCSI host adapter
    > Narrow Controller at PCI 0/16/0
    > PCI MMAPed I/O Base: 0xe8001000
    > Adapter SEEPROM Config: SEEPROM found and used.
    > Adaptec SCSI BIOS: Disabled
    > IRQ: 9
    > SCBs: Active 1, Max Active 1,
    > Allocated 15, HW 3, Page 255
    > Interrupts: 15
    > BIOS Control Word: 0x0000
    > Adapter Control Word: 0x0055
    > Extended Translation: Disabled
    > Disconnect Enable Flags: 0x00ff
    > Tag Queue Enable Flags: 0x0000
    > Ordered Queue Tag Flags: 0x0000
    > Default Tag Queue Depth: 8
    > Tagged Queue By Device array for aic7xxx host instance 0:
    > {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
    > Actual queue depth per device for aic7xxx host instance 0:
    > {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
    >
    >

    Hi,

    ok, the controller chips is recogniced. But I do not have any suggestions.

    Bye
    Oliver 

    --
Homepage:       http://www.wolfsburg.de/~rauch
sane-umax:      http://www.wolfsburg.de/~rauch/sane/sane-umax.html
xsane:          http://www.wolfsburg.de/~rauch/sane/sane-xsane.html
E-Mail:         mailto:Oliver.Rauch@Wolfsburg.DE

    --
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com

    This archive was generated by hypermail 2b29 : Tue Jul 18 2000 - 09:40:14 PDT